|
NCP1240G Datasheet, PDF (1/44 Pages) ON Semiconductor – Fixed Frequency Current Mode Controller for Flyback Converters | |||
|
NCP1240G
Product Preview
Fixed Frequency Current
Mode Controller for Flyback
Converters
The NCP1240G is a new fixedâfrequency currentâmode controller
featuring the Dynamic SelfâSupply. This function greatly simplifies
the design of the auxiliary supply and the VCC capacitor by activating
the internal startup current source to supply the controller during
startâup, transients, latch, standâby etc. This device contains a special
HV detector which detect the application unplug from the AC input
line and triggers the X2 discharge current. This HV structure allows
the brownâout detection as well.
It features a timerâbased fault detection that ensures the detection of
overload and an adjustable compensation to help keep the maximum
power independent of the input voltage.
Due to frequency foldback, the controller exhibits excellent
efficiency in light load condition while still achieving very low
standby power consumption. Internal frequency jittering, ramp
compensation, and a versatile latch input make this controller an
excellent candidate for the robust power supply designs.
A dedicated Off mode allows to reach the extremely low no load
input power consumption via âsleepingâ whole device and thus
minimize the power consumption of the control circuitry.
Features
⢠FixedâFrequency CurrentâMode Operation (65 kHz and 100 kHz
frequency options)
⢠Frequency Foldback then Skip Mode for Maximized Performance in
Light Load and Standby Conditions
⢠TimerâBased Overload Protection with Latched (Option G)
⢠Highâvoltage Current Source with BrownâOut Detection and
Dynamic SelfâSupply, Simplifying the Design of the VCC Circuitry
⢠Frequency Modulation for Softened EMI Signature
⢠Adjustable Overpower Protection Dependant on the Bulk Voltage
⢠Latchâoff Input Combined with the Overpower Protection Sensing
www.onsemi.com
SOICâ7
CASE 751U
MARKING
DIAGRAM
8
40G065
ALYWX
G
1
40G065 = Specific Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G
= PbâFree Package
PIN CONNECTIONS
Latch 1
8 HV
FB 2
CS 3
GND 4
6 VCC
5 DRV
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information on page 43 of
this data sheet.
Input
⢠VCC Operation up to 28 V, With Overvoltage Detection
⢠500/800 mA Source/Sink Drive Peak Current
Capability
⢠10 ms SoftâStart
⢠Internal Thermal Shutdown
⢠NoâLoad Standby Power < 30 mW
⢠X2 Capacitor in EMI Filter Discharging Feature
⢠These Devices are PbâFree and Halogen Free/BFR Free
Typical Applications
⢠ACâDC Adapters for Notebooks, LCD, and Printers
⢠Offline Battery Chargers
⢠Consumer Electronic Power Supplies
⢠Auxiliary/Housekeeping Power Supplies
⢠Offline Adapters for Notebooks
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2016
1
July, 2016 â Rev. P0
Publication Order Number:
NCP1240G/D
|
▷ |