|
NCP1234 Datasheet, PDF (1/33 Pages) ON Semiconductor – Fixed Frequency Current Mode Controller for Flyback Converters | |||
|
NCP1234
Fixed Frequency Current
Mode Controller for Flyback
Converters
The NCP1234 is a new fixedâfrequency currentâmode controller
featuring Dynamic SelfâSupply (DSS). This device is pinâtoâpin
http://onsemi.com
compatible with the previous NCP12xx families.
The DSS function greatly simplifies the design of the auxiliary
supply and the VCC capacitor by activating the internal startup current
source to supply the controller during transients.
Due to frequency foldback, the controller exhibits excellent
efficiency in light load condition while still achieving very low
SOICâ7
CASE 751U
standby power consumption. Internal frequency jittering, ramp
compensation, and a versatile latch input make this controller an
MARKING DIAGRAM
excellent candidate for converters where components cost is the key
8
constraints.
It features a timerâbased fault detection that ensures the detection of
overload independently of an auxiliary winding, and an adjustable
compensation to help keep the maximum power independent of the
input voltage.
Finally, due to a careful design, the precision of critical parameters
is well controlled over the entire temperature range (â40ï°C to
+125ï°C).
Features
ï· FixedâFrequency CurrentâMode Operation with BuiltâIn Ramp
34Xff
ALYWX
G
1
34Xff = Specific Device Code
X = A or B
ff = 65 or 100
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = PbâFree Package
Compensation
ï· 65 kHz or 100 kHz Oscillator Frequency version
ï· Frequency Foldback then Skip Mode for Maximized Performance in
PIN CONNECTIONS
Latch 1
8 HV
Light Load and Standby Conditions
ï· TimerâBased Overload Protection with Latched (option A) or
AutoâRecovery (option B) Operation
ï· Highâvoltage Current Source with Dynamic SelfâSupply,
Simplifying the Design of the VCC Capacitor
ï· Frequency Modulation for Softened EMI Signature, including during
Frequency Foldback mode
ï· Adjustable Overpower Compensation
ï· Latchâoff Input for Severe Fault Conditions, Allowing Direct
FB 2
CS 3
GND 4
6 VCC
5 DRV
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 32 of this data sheet.
Connection of an NTC for Overtemperature Protection (OTP)
ï· VCC Operation up to 28 V, with Overvoltage Detection
ï· ï±500 mA Peak Source/Sink Current Drive Capability
ï· 4.0 ms SoftâStart
ï· Internal Thermal Shutdown
ï· PinâtoâPin Compatible with the Existing NCP12xx
Series
Typical Applications
ï· ACâDC Adapters for Notebooks, LCD, and Printers
ï· Offline Battery Chargers
ï· These Devices are PbâFree, Halogen Free/BFR Free
ï· Consumer Electronic Power Supplies
and are RoHS Compliant
ï· Auxiliary/Housekeeping Power Supplies
ï£ Semiconductor Components Industries, LLC, 2011
1
October, 2011 â Rev. 1
Publication Order Number:
NCP1234/D
|
▷ |