NCP1219BD100R2G Datasheet, PDF (1/20 Pages) ON Semiconductor – PWM Controller with Adjustable Skip Level and External Latch Input

NCP1219
PWM Controller with
Adjustable Skip Level and
External Latch Input
The NCP1219 represents a new, pin to pin compatible, generation
of the successful 7−pin current mode NCP12XX product series. The
controller allows for excellent standby power consumption by use of
its adjustable skip mode and integrated high voltage startup FET.
Internal frequency jittering, ramp compensation, timer−based fault
detection and a latch input make this controller an excellent
candidate for converters where ruggedness and component cost are
the key constraints.
The Dynamic Self Supply (DSS) drastically simplifies the
transformer design in avoiding the use of an auxiliary winding to
supply the NCP1219. This feature is particularly useful in
applications where the output voltage varies during operation (e.g.
battery chargers). Due to its high voltage technology, the IC can be
directly connected to the high voltage dc rail.
Features
• Fixed−Frequency Current−Mode Operation with Ramp
Compensation (65 kHz and 100 kHz Options)
• Dynamic Self Supply Eliminates the Need for an Auxiliary Winding
• Timer−Based Fault Protection for Improved Overload Detection
• Cycle Skip Reduces Input Power in Standby Mode
• Latch and Auto−Recovery Overload Protection Options
• Internal High Voltage Startup Circuit
• Accurate Current Limit Detector (±5%)
• Adjustable Skip Level
• Latch Input for Easy Implementation of Overvoltage and
Overtemperature Protection
• Frequency Modulation for Softened EMI Signature
• 500 mA/800 mA Peak Source/Sink Current Drive Capability
• Pin to Pin Compatible with the Existing NCP12XX Series
• These Devices are Pb−Free and Halogen Free/BFR Free*
Typical Applications
• AC−DC Adapters for Notebooks, LCD Monitors
• Offline Battery Chargers
• Consumer Electronic Appliances STB, DVD, DVDR
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques Reference
Manual, SOLDERRM/D.
http://onsemi.com
SOIC−7
D SUFFIX
CASE 751U
MARKING DIAGRAM
8
1219XZ
ALYW
G
1
1219 = Specific Device Code
X = Overcurrent
= (A = latch, B = auto−retry)
Z = Frequency
= (6 = 65 kHz, 1 = 100 kHz)
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
PIN CONNECTIONS
Skip/latch
1
HV
FB
CS
V_CC
GND
Drv
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 19 of this data sheet.
© Semiconductor Components Industries, LLC, 2009
1
October, 2009 − Rev. 3
Publication Order Number:
NCP1219/D