NCP1081_13 Datasheet, PDF (1/18 Pages) ON Semiconductor – Integrated High Power PoE-PD Interface & DC-DC Converter Contr

NCP1081
Integrated High Power
PoE-PD Interface & DC-DC
Converter Controller
Introduction
The NCP1081 is a member of ON Semiconductor’s high power
http://onsemi.com
HIPO Power over Ethernet Powered Device (PoE−PD) product family
and represents a robust, flexible and highly integrated solution
targeting demanding medium and high power Ethernet applications. It
combines in a single unit an enhanced PoE−PD interface supporting
the IEEE802.3af and the 802.3at standard and a flexible and
1
configurable DC−DC converter controller.
The NCP1081’s exceptional capabilities offer new opportunities for
the design of products powered directly over Ethernet lines,
TSSOP−20 EP
DE SUFFIX
CASE 948AB
eliminating the need for local power adaptors or power supplies and
drastically reducing the overall installation and maintenance cost.
ON Semiconductor’s unique manufacturing process and design
enhancements allow the NCP1081 to deliver up to 25.5 W for the
IEEE802.3at standard and up to 40 W for proprietary high power PoE
applications. The NCP1081 enables the IEEE802.3at and implements
a two event physical layer classification. Additional proprietary
classification procedures support high power power sourcing
equipment (PSE) on the market. The unique high power features
leverage the significant cost advantages of PoE− enabled systems to a
much broader spectrum of products in emerging markets such as
industrial ethernet devices, PTZ and Dome IP cameras, RFID readers,
NCP1081 = Specific Device Code
MIMO WLAN access points, high end VoIP phones, notebooks, etc.
The integrated current mode DC−DC controller facilitates isolated
and non−isolated fly−back, forward and buck converter topologies. It
XXXX = Date Code
Y
= Assembly Location
ZZ = Traceability Code
has all the features necessary for a flexible, robust and highly efficient
design including programmable switching frequency, duty cycle up to
ORDERING INFORMATION
80 percent, slope compensation, and soft start−up.
The NCP1081 is fabricated in a robust high voltage
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
process and integrates a rugged vertical N−channel DMOS
with a low loss current sense technique suitable for the most _{• Extended Power Ranges up to 40 W}
demanding environments and capable of withstanding harsh
environments such as hot swap and cable ESD events.
The NCP1081 complements ON Semiconductor’s ASSP
portfolio in industrial devices and can be combined with
stepper motor drivers, CAN bus drivers and other high−
• Programmable Classification Current
• Adjustable Under Voltage Lock Out
• Programmable Inrush Current Limit
• Programmable Operational Current Limit up to
voltage interfacing devices to offer complete solutions to the
industrial and security market.
1100 mA for Extended Power Ranges
• Over−temperature Protection
Features
• These are Pb−Free Devices
Powered Device Interface
• Supporting the IEEE802.3af and the 802.3at Standard
• Supports IEEE802.3at Two Event Layer 1
Classification
• High Power Layer 1 Classification Indicator
• Industrial Temperature Range −40°C to 85°C with Full
Operation up to 150°C Junction Temperature
• 0.6 W Hot−swap Pass−switch with Low Loss Current
Sense Technique
• Vertical N−channel DMOS Pass−switch offers the
Robustness of Discrete MOSFETs with Integrated
Temperature Control
© Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. 7
Publication Order Number:
NCP1081/D