|
NCP1080 Datasheet, PDF (1/14 Pages) ON Semiconductor – Integrated PoE-PD & DC-DC Converter Controller | |||
|
NCP1080
Integrated PoE-PD & DC-DC
Converter Controller
Introduction
The NCP1080 is a member of ON Semiconductorâs Power over
Ethernet Powered Device (PoEâPD) product family and represents a
robust, flexible and highly integrated solution targeting demanding
Ethernet applications. It combines in a single unit an enhanced
PoEâPD interface fully supporting the IEEE802.3af specification and
a flexible and configurable DCâDC converter controller.
The NCP1080âs exceptional capabilities offer new opportunities for
the design of products powered directly over Ethernet lines,
eliminating the need for local power adaptors or power supplies and
drastically reducing the overall installation and maintenance cost.
ON Semiconductorâs unique manufacturing process and design
enhancements allow the NCP1080 to deliver up to 13 W of regulated
power to support PoE applications according to the IEEE802.3af
standard. This device leverages the significant cost advantages of
PoEâenabled systems to a broad spectrum of products in markets such
as VoIP phones, wireless LAN access point, security cameras, point of
sales terminals, RFID readers, industrial ethernet devices, etc.
The integrated current mode DCâDC controller facilitates isolated
and nonâisolated flyâback, forward and buck converter topologies. It
has all the features necessary for a flexible, robust and highly efficient
design including programmable switching frequency, duty cycle up to
80 percent, slope compensation, and soft startâup.
The NCP1080 is fabricated in a robust high voltage process and
integrates a rugged vertical Nâchannel DMOS with a low loss current
sense technique suitable for the most demanding environments and
capable of withstanding harsh environments such as hot swap and
cable ESD events.
The NCP1080 complements ON Semiconductorâs ASSP portfolio
in communications and industrial devices and can be combined with
other highâvoltage interfacing devices to offer complete solutions to
the communication, industrial and security markets.
http://onsemi.com
TSSOPâ20 EP
DE SUFFIX
CASE 948AB
NCP1080 = Specific Device Code
XXXX = Date Code
Y
= Assembly Location
ZZ = Traceability Code
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
Features
Powered Device Interface
⢠Fully supports IEEE802.3af standard
⢠Regulated power output up to 13 W
⢠Programmable classification current
⢠Adjustable under voltage lock out
⢠Programmable inrush current limit
⢠Programmable operational current limit up to 500 mA
⢠Overâtemperature protection
⢠Industrial temperature range â40°C to 85°C with full
operation up to 150°C junction temperature
⢠0.6 ohm hotâswap passâswitch with low loss current
sense technique
⢠Vertical Nâchannel DMOS passâswitch offers the
robustness of discrete MOSFETs with integrated
temperature control
DCâDC Converter Controller
⢠Current mode control
⢠Supports isolated and nonâisolated DCâDC converter
applications
⢠Internal voltage regulators
⢠Wide duty cycle range with internal slope
compensation circuitry
⢠Programmable oscillator frequency
⢠Programmable softâstart time
© Semiconductor Components Industries, LLC, 2008
1
September, 2008 â Rev. 4
Publication Order Number:
NCP1080/D
|
▷ |