|
NCP1032 Datasheet, PDF (1/21 Pages) ON Semiconductor – Low Power PWM Controller | |||
|
NCP1032
Low Power PWM Controller
with On-Chip Power Switch
and Startup Circuits for
Telecom Systems
The NCP1032 is a miniature highâvoltage monolithic switching
converter with onâchip power switch and startup circuits. It
incorporates in a single IC all the active power control logic and
protection circuitry required to implement, with minimal external
components several switching regulator applications, such as a
secondary side bias supply or a low power DCâDC converter. This
converter is ideally suited for 24 V and 48 V telecom and medical
isolated power supply applications. The NCP1032 can be configured
in any singleâended topology such as forward or flyback converter.
The NCP1032 is targeted for applications requiring up to 3 W.
The internal error amplifier allows the NCP1032 to be easily
configured for secondary or primary side regulation operation in
isolated and nonâisolated configurations. The fixed frequency
oscillator is optimized for operation up to 1 MHz and is capable of
external frequency synchronization, providing additional design
flexibility. In addition, the NCP1032 incorporates undervoltage and
overvoltage line detectors, programmable cycleâbyâcycle current
limit, internal softâstart, and thermal shutdown to protect the
controller under fault conditions.
Features
⢠On Chip High 200 V Power Switch Circuit and Startup Circuit
⢠Internal Startup Regulator with Auxiliary Winding Override
⢠Programmable Oscillator Frequency Operation up to 1 MHz
⢠External Frequency Synchronization Capability
⢠Frequency Foldâdown Under Fault Conditions
⢠Trimmed ± 2% Internal Reference
⢠Programmable CycleâbyâCycle Current Limit
⢠Internal SoftâStart
⢠Active Leading Edge Blanking Circuit
⢠Line Under and Over Voltage Protection
⢠Over Temperature Protection
⢠These are PbâFree Devices
Typical Applications
⢠POE (Power Over Ethernet)/PD. Refer to Application Note AND8247
⢠Secondary Side Bias Supply for Isolated DCâDC Converters
⢠Stand Alone Low Power DCâDC Converter
⢠Low Power Bias Supply
⢠Low Power Boost Converter
⢠Medical Isolated Power Supplies
⢠Bias Supply for Telecom Systems. Refer to App Note AND8119/D
http://onsemi.com
MARKING
DIAGRAMS
WDFN8
1032x
1
MN SUFFIX
CASE 511BH
ALYW G
G
1032 = Specific Device Marking
x = A or B
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = PbâFree Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
GND
ÃCT
à VFB
ÃÃ COMP
ÃÃÃÃÃÃÃÃ GND
VDRAIN
VCC
UV/OV
CL
WDFN8 (Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 20 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
May, 2014 â Rev. 2
Publication Order Number:
NCP1032/D
|
▷ |