NCP1030_06 Datasheet, PDF (1/18 Pages) ON Semiconductor – Low Power PWM Controller with On−Chip Power Switch and Startup Circuits for 48V Telecom Systems

NCP1030, NCP1031
Low Power PWM Controller
with On−Chip Power Switch
and Startup Circuits for
48 V Telecom Systems
The NCP1030 and NCP1031 are a family of miniature high−voltage
monolithic switching regulators with on−chip Power Switch and Startup
Circuits. The NCP103x family incorporates in a single IC all the active
power, control logic and protection circuitry required to implement, with
minimal external components, several switching regulator applications,
such as a secondary side bias supply or a low power dc−dc converter.
This controller family is ideally suited for 48 V telecom, 42 V automotive
and 12 V input applications. The NCP103x can be configured in any
single−ended topology such as forward or flyback. The NCP1030 is
targeted for applications requiring up to 3 W, and the NCP1031 is
targeted for applications requiring up to 6 W.
The internal error amplifier allows the NCP103x family to be easily
configured for secondary or primary side regulation operation in
isolated and non−isolated configurations. The fixed frequency oscillator
is optimized for operation up to 1 MHz and is capable of external
frequency synchronization, providing additional design flexibility. In
addition, the NCP103x incorporates individual line undervoltage and
overvoltage detectors, cycle by cycle current limit and thermal
shutdown to protect the controller under fault conditions. The preset
current limit thresholds eliminate the need for external sensing
components.
Features
• On Chip High 200 V Power Switch Circuit and Startup Circuit
• Internal Startup Regulator with Auxiliary Winding Override
• Operation up to 1 MHz
• External Frequency Synchronization Capability
• Frequency Fold−down Under Fault Conditions
• Trimmed ± 2% Internal Reference
• Line Undervoltage and Overvoltage Detectors
• Cycle by Cycle Current Limit Using SENSEFETt
• Active LEB Circuit
• Overtemperature Protection
• Internal Error Amplifier
• Pb−Free Packages are Available
Typical Applications
• POE (Power Over Ethernet)/PD. Refer to Application Note AND8247.
• Secondary Side Bias Supply for Isolated dc−dc Converters
• Stand Alone Low Power dc−dc Converter
• Low Power Bias Supply
• Low Power Boost Converter
http://onsemi.com
MARKING
DIAGRAMS
8
1
Micro8t
DM SUFFIX
CASE 846A
8
1030
AYWG
G
1
8
1
SO−8
D SUFFIX
CASE 751
8
N1031
ALYW
G
1
1030/N1031 = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
1
GND
2
C_T
3
V_FB
4
COMP
8
V_DRAIN
7
V_CC
6
UV
5
OV
(Top View)
ORDERING INFORMATION
Device
Package
Shipping^†
NCP1030DMR2
Micro8 4000/Tape & Reel
NCP1030DMR2G Micro8 4000/Tape & Reel
(Pb−Free)
NCP1031DR2
SO−8 2500/Tape & Reel
NCP1031DR2G
SO−8 2500/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2006
1
January, 2006 − Rev. 6
Publication Order Number:
NCP1030/D