|
NCP100_06 Datasheet, PDF (1/12 Pages) ON Semiconductor – Sub 1.0 V Precision Adjustable Shunt Regulator | |||
|
NCP100
Sub 1.0 V Precision
Adjustable Shunt Regulator
The NCP100 is a precision low voltage shunt regulator that is
programmable over a voltage range of 0.9 V to 6.0 V. This device
features a guaranteed reference accuracy of ±1.7% at 25°C and ±2.6%
over the entire temperature range of â40°C to 85°C. The NCP100
exhibits a sharp low current turnâon characteristic with a low dynamic
impedance of 0.20 W over an operating current range of 100 mA to
20 mA. These characteristics make this device an ideal replacement
for zener diodes in numerous application circuits that require a precise
low voltage reference. When combined with an optocoupler, the
NCP100 can be used as an error amplifier for controlling the feedback
loop in isolated low output voltage (2.3 V) switching power supplies.
This device is available in TOâ92 and in an economical space saving
TSOPâ5 package.
Features
⢠Programmable Output Voltage Range of 0.9 V to 6.0 V
⢠Voltage Reference Tolerance of ±1.7%
⢠Sharp Low Current TurnâON Characteristic
⢠Low Dynamic Output Impedance of 0.2 W from 100 mA to 20 mA
⢠Wide Operating Current Range of 80 mA to 20 mA
⢠TOâ92 and Space Saving TSOPâ5 Package
⢠PbâFree Package is Available
Applications
⢠Reference for Single Cell Alkaline, NiCD and NiMH Applications
⢠Low Output Voltage (2.3 V) Switching Power Supply Error Amp
⢠Battery Powered Consumer Products
⢠Portable Test Equipment and Instrumentation
Cathode (K)
Reference
(R)
Reference
(R)
Anode (A)
Cathode (K)
0.7 V
Figure 1. Symbol
Anode (A)
Figure 2. Representative Block Diagram
© Semiconductor Components Industries, LLC, 2006
1
November, 2006 â Rev. 10
http://onsemi.com
TOâ92 (TOâ226)
LP SUFFIX
CASE 029
Pin 1. Reference
2. Anode
1
3. Cathode
23
5
1
TSOPâ5
SN SUFFIX
CASE 483
PIN CONNECTIONS AND
MARKING DIAGRAM
NC 1
5 Anode
Anode 2
Cathode 3
4 Reference
XXXXX
XXXXX
ALYWWG
G
(Top View)
RAB = Device Code
A = Assembly Location
Y = Year
W = Work Week
G = PbâFree Package
XXXXX = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
WW = Work Week
G
= PbâFree Package
(Note: Microdot may be in either
location)
ORDERING INFORMATION
Device
Package
Shippingâ
NCP100SNT1
TSOPâ5 3000 / Tape & Reel
NCP100SNT1G TSOPâ5 3000 / Tape & Reel
(PbâFree)
NCP100ALPRPG TOâ92 2000 / Ammo Pack
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
NCP100/D
|
▷ |