NCN8026A Datasheet, PDF (1/14 Pages) ON Semiconductor – Compact Low Power Smart Card Interface IC

NCN8026A
Compact Low Power Smart
Card Interface IC
The NCN8026A is a compact and cost−effective single SIM &
smart card interface IC. It can be used with 1.8 V, 3 V and 5 V IC
cards. The card VCC supply is provided by a built−in very low drop
out and low noise Regulator. The NCN8026A offers enhanced
http://onsemi.com
performances with low VCC output ripple under load−transient
conditions, very low shutdown current and 1.8 V−to−5 V logic
compatibility.
MARKING
DIAGRAMS
This device is fully compatible with the ISO 7816−3, EMV 4.2,
UICC and related standards including NDS and other STB standards
(Nagravision, Irdeto, Conax ..). It satisfies the requirements specifying
conditional access into Set−Top−Boxes (STB) or Conditional Access
QFN24
MN SUFFIX
CASE 485L
NCN
8026A
ALYWG
G
Modules (CAM).
This smart card interface IC is available in a QFN−24 package
providing all the industry−standard features usually required for STB
smart card interface.
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
Features
• Single IC Card Interface
G = Pb−Free Package
(*Note: Microdot may be in either location)
• Fully Compatible with ISO 7816−3, EMV4.2, UICC and Related
Standards Including NDS and Other STB Standards (Nagravision,
Irdeto, Conax...)
• Three Bidirectional Buffered I/O Level Shifters (C4, C7 and C8)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
• 1.8 V, 3.0 V or 5.0 V $ 5 % Regulated Card Power Supply Such as
I_CC ≤ 70 mA with Low VCC Ripple
• Regulator Power Supply: V_DDP = 2.7 V to 5.5 V (@ 1.8 V),
3.0 V to 5.5 V (@ 3.0 V) and 4.85 V to 5.5 V (@ 5.0 V)
• Independent Power Supply range on Controller
• Interrupt Signal INT for Card Presence and Faults
Interface such as V_DD = 1.6 V to 5.5 V
• Handles Class A, B and C Smart Cards
• Short Circuit Protection on all Card Pins
• Support up to 27 MHz input Clock with Internal
• Chip Select Pin (CS) for Dual Card Operating
• External Under−Voltage Lockout Threshold
Adjustment on V_DD (PORADJ Pin)
• Available in One Package Formats: QFN−24
Division Ratio 1/1, 1/2, 1/4 and 1/8 through CLKDIV1
• These are Pb−Free Devices
and CLKDIV2
• HBM ESD Protection on Card Pins up to +8 kV
(Human Body Model)
• Activation / Deactivation Sequences (ISO7816
Sequencer)
• Fault Protection Mechanisms Enabling Automatic
Device Deactivation in Case of Overload, Overheating,
Typical Application
• Pay TV, Set Top Box Decoder with Conditional Access
and Pay−per−View
• Conditional Access Module (CAM / CAS)
• SIM card interface applications (UICC / USIM)
• Point Of Sales and Transaction Terminals
Card Take−off or Power Supply Drop−out (OCP, OTP,
• Electronic Payment and Identification
UVP)
© Semiconductor Components Industries, LLC, 2013
1
January, 2013 − Rev. 2
Publication Order Number:
NCN8026A/D