|
NCN8025AMNGEVB Datasheet, PDF (1/15 Pages) ON Semiconductor – Compact SMART CARD Interface IC | |||
|
NCN8025 / NCN8025A
Compact SMART CARD
Interface IC
The NCN8025 / NCN8025A is a compact and costâeffective single
smart card interface IC. It is dedicated for 1.8 V / 3.0 V / 5.0 V smart
card reader/writer applications. The card VCC supply is provided by a
builtâin very low drop out and low noise LDO.
www.onsemi.com
The device is fully compatible with the ISO 7816â3, EMV 4.3,
UICC and related standards including NDS and other STB standards
(Nagravision, Irdeto...). It satisfies the requirements specifying
MARKING
DIAGRAMS
conditional access into SetâTopâBoxes (STB) or Conditional Access
Modules (CAM and CAS).
This smart card interface IC is available in a QFNâ24 package
(NCN8025A) providing all of the industryâstandard features usually
QFN24
MN SUFFIX
CASE 485L
NCN
8025A
ALYWG
G
required for STB smart card interface. It is also offered in a very
compact package profile, QFNâ16 (NCN8025), satisfying the
requirements of costâefficiency and spaceâsaving requested by CAM
and SIM applications.
QFN16
NCN
MT SUFFIX
8025
1
CASE 488AK
ALYWG
G
For details regarding device implementation refer to application
note AND8003/D, available upon request (please contact your local
ON Semiconductor sales office or representative).
A = Assembly Location
L = Wafer Lot
Y = Year
Features
⢠Single IC Card Interface
W = Work Week
G = PbâFree Package
(Note: Microdot may be in either location)
⢠Fully Compatible with ISO 7816â3, EMV 4.3, UICC and Related
Standards Including NDS and Other STB Standards (Nagravision,
Irdeto...)
⢠3 Bidirectional Buffered I/O Level Shifters (C4, C7 and C8)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
(QFNâ24) â 1 Bidirectional I/O Level Shifter for the QFNâ16
compact version
⢠1.8 V, 3.0 V or 5.0 V $ 5 % Regulated Card Power Supply
Generation such as ICC v 70 mA
⢠Regulator Power Supply: VDDP = 2.7 V to 5.5 V (@ 1.8 V),
3.0 V to 5.5 V (@ 3.0 V) & 4.85 V to 5.5 V (@ 5.0 V)
⢠Independent Power Supply range on Controller
⢠Interrupt Signal INT for Card Presence and Faults
Interface such as VDD = 2.7 V to 5.5 V
⢠Handles Class A, B and C Smart Cards
⢠External UnderâVoltage Lockout Threshold
Adjustment on VDD (PORADJ Pin) (Except QFNâ16)
⢠Short Circuit Protection on all Card Pins
⢠Available in 2 Package Formats: QFNâ24
⢠Support up to 27 MHz input Clock with Internal
Division Ratio 1/1, 1/2, 1/4 and 1/8 through CLKDIV1
(NCN8025A) and QFNâ16 (NCN8025)
⢠These are PbâFree Devices
and CLKDIV2
⢠ESD Protection on Card Pins up to +8 kV (Human
Body Model)
⢠Activation / Deactivation Sequences (ISO7816
Sequencer)
⢠Fault Protection Mechanisms Enabling Automatic
Device Deactivation in Case of Overload, Overheating,
Card Takeâoff or Power Supply Dropâout (OCP, OTP,
Typical Application
⢠Pay TV, Set Top Box Decoder with Conditional Access
and PayâperâView
⢠Conditional Access Module (CAM / CAS)
⢠SIM card interface applications (UICC / USIM)
⢠Point Of Sales and Transaction Terminals
⢠Electronic Payment and Identification
UVP)
© Semiconductor Components Industries, LLC, 2016
1
October, 2016 â Rev. 5
Publication Order Number:
NCN8025/D
|
▷ |