NCN6001_14 Datasheet, PDF (1/33 Pages) ON Semiconductor – Compact Smart Card Interface IC

NCN6001
Compact Smart Card
Interface IC
The NCN6001 is an integrated circuit dedicated to the smart card
interface applications. The device handles any type of smart card
through a simple and flexible microcontroller interface. On top of that,
thanks to the built−in chip select pin, several couplers can be
connected in parallel.
The device is particularly suited for low cost, low power
applications, with high extended battery life coming from extremely
low quiescent current.
Features
• 100% Compatible with ISO 7816−3, EMV and GIE−CB Standards
• Fully GSM Compliant
• Wide Battery Supply Voltage Range: 2.7 < V_CC < 5.5 V
• Programmable CRD_VCC Supply Handles 1.8 V, 3.0 V or 5.0 V
Card Operation
• Programmable Rise and Fall Card Clock Slopes
• Programmable Card Clock Divider
• Built−in Chip Select Logic Allows Parallel Coupling Operation
• ESD Protection on Card Pins (8.0 kV, Human Body Model)
• Supports up to 40 MHz Input Clock
• Built−in Programmable CRD_CLK Stop Function Handles Run or
Low State
• Programmable CRD_CLK Slopes to Cope with Wide Operating
Frequency Range
• Fast CRD_VCC Turn−on and Turn−off Sequence
• These are Pb−Free Devices
Typical Applications
• E−Commerce Interface
• Automatic Teller Machine (ATM) Smart Card
• Point of Sales (POS) System
• Pay TV System
www.onsemi.com
1
TSSOP−20
DTB SUFFIX
CASE 948E
PIN CONNECTIONS
I/O 1
INT 2
CLK_IN 3
MOSI 4
CLK_SPI ₅
EN_RPU 6
MISO 7
CS 8
V_CC 9
Lout_L 10
(Top View)
20 CRD_IO
19 CRD_RST
18 CRD_DET
17 CRD_CLK
16 GND
15 C4/S0
14 C8/S1
13 CRD_VCC
12 Lout_H
11 PWR_GND
MARKING DIAGRAM
20
NCN
6001
ALYWG
G
1
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 32 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
October, 2014 − Rev. 6
Publication Order Number:
NCN6001/D