NCN1188_16 Datasheet, PDF (1/14 Pages) ON Semiconductor – 3:1 High Speed USB Switch with Audio and MHL Capability

NCN1188
3:1 High Speed USB Switch
with Audio and MHL
Capability
The NCN1188 allows portable systems to share a single USB 2.0 or
3.0 receptacle to transmit and receive paired signals from three
separate locations. All of the three differential channels are compliant
to High Speed USB 2.0, Full Speed USB 1.1, Low Speed USB 1.0 and
any generic UART protocol. The two dedicated high speed data paths
also support Mobile High Definition Link (MHL) video up to
resolutions of 1080i (2.25 Gbps) and 1080p (3 Gbps in Packed Pixel
mode). The multi−purpose audio path is capable of passing signals
with negative voltages as low as 2 V below ground and features shunt
resistors to reduce Pop and Click noise in the audio system. The
NCN1188 is housed in a space saving, ultra low profile 2.0 x 1.7 x
0.5 mm, 12 pins UQFN package.
Features
• High Bandwidth of 1.8 GHz
• V_CC Operating Range from 2.7 V to 5.5 V
• V_IS Signal from 0 V to 3.7 V for Data Transfer
• V_IS Signal from −2 V to 2 V for Stereo Headphone Connection
• Audio Shunt resistor for Pop & Click Noise Reduction
• V_IO Control Pins Compatible to 1.8V Interfaces
• Low Power Consumption of 23 mA
• Small UQFN 2.0 x 1.7 x 0.5 mm Package
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• USB 2.0 / 3.0 Micro−B Applications
• USB to HDMI Video Interfaces via MHL
• Features Phones and Smart Phones
• Digital Cameras
• Handset Media Players
www.onsemi.com
MARKING
DIAGRAM
UQFN12
MU SUFFIX
AGM
1
CASE 523AE
G
AG = Specific Device Code
M = Date Code
G = Pb−Free Package
PIN ASSIGNMENTS
(Top View)
ORDERING INFORMATION
Device
NCN1188MUTAG
Package
UQFN12
(Pb−Free)
Shipping^†
3000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Figure 1. NCN1188 Typical Application Schematic
© Semiconductor Components Industries, LLC, 2016
1
January, 2016 − Rev. 4
Publication Order Number:
NCN1188/D