|
NBSG53A Datasheet, PDF (1/18 Pages) ON Semiconductor – 2.5V/3.3V SiGe Selectable Differential Clock and Data D Flip-Flop/Clock Divider with Reset and OLS | |||
|
NBSG53A
2.5V/3.3V SiGe Selectable
Differential Clock and Data
D FlipâFlop/Clock Divider
with Reset and OLS*
The NBSG53A is a multiâfunction differential D flipâflop (DFF) or
fixed divide by two (DIV/2) clock generator. This is a part of the
GigaComm⢠family of high performance Silicon Germanium
products. A strappable control pin is provided to select between the
two functions. The device is housed in a low profile 4x4 mm 16âpin
FlipâChip BGA (FCBGA) or a 3x3 mm 16 pin QFN package.
The NBSG53A is a device with data, clock, OLS, reset, and select
inputs. Differential inputs incorporate internal 50 W termination
resistors and accept NECL (Negative ECL), PECL (Positive ECL),
LVCMOS/LVTTL, CML, or LVDS. The OLS input is used to
program the peakâtoâpeak output amplitude between 0 and 800 mV
in five discrete steps. The RESET and SELECT inputs are
singleâended and can be driven with either LVECL or
LVCMOS/LVTTL input levels.
Data is transferred to the outputs on the positive edge of the clock.
The differential clock inputs of the NBSG53A allow the device to also
be used as a negative edge triggered device.
⢠Maximum Input Clock Frequency (DFF) > 8 GHz Typical
(See Figures 4, 6, 8, 10, and 11)
⢠Maximum Input Clock Frequency (DIV/2) > 10 GHz Typical
(See Figures 5, 7, 9, 10, and 11)
⢠210 ps Typical Propagation Delay (OLS = FLOAT)
⢠45 ps Typical Rise and Fall Times (OLS = FLOAT)
⢠DIV/2 Mode (Active with Select Low)
⢠DFF Mode (Active with Select High)
⢠Selectable Swing PECL Output with Operating Range: VCC = 2.375 V
to 3.465 V with VEE = 0 V
⢠Selectable Swing NECL Output with NECL Inputs with
Operating Range: VCC = 0 V with VEE = â2.375 V to â3.465 V
⢠Selectable Output Level (0 V, 200 mV, 400 mV, 600 mV, or 800 mV
PeakâtoâPeak Output)
⢠50 W Internal Input Termination Resistors on all Differential Inputs
*Output Level Select
http://onsemi.com
MARKING
DIAGRAM**
FCBGAâ16
BA SUFFIX
CASE 489
SG
53A
LYW
QFNâ16
MN SUFFIX
CASE 485G
SG53A
ALYW
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
**For further details, refer to Application
Note AND8002/D
Board
Description
NBSG53ABAEVB NBSG53ABA Evaluation Board
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 16 of this data sheet.
© Semiconductor Components Industries, LLC, 2004
1
March, 2004 â Rev. 5
Publication Order Number:
NBSG53A/D
|
▷ |