NBSG11 Datasheet, PDF (1/10 Pages) ON Semiconductor – 2.5V/3.3V SiGe 1:2 Differential Clock Driver with RSECL* Outputs

NBSG11
2.5V/3.3V SiGe 1:2
Differential Clock Driver
with RSECL* Outputs
*Reduced Swing ECL
The NBSG11 is a 1-to-2 differential fanout buffer, optimized for
low skew and ultra-low JITTER.
Inputs incorporate internal 50 W termination resistors and accept
NECL (Negative ECL), PECL (Positive ECL), CML, LVCMOS,
LVTTL, or LVDS. Outputs are RSECL (Reduced Swing ECL),
400 mV.
• Maximum Input Clock Frequency up to 12 GHz Typical
• Maximum Input Data Rate up to 12 Gb/s Typical
• 30 ps Typical Rise and Fall Times
• 125 ps Typical Propagation Delay
• RSPECL Output with Operating Range: V_CC = 2.375 V to 3.465 V
with V_EE = 0 V
• RSNECL Output with RSNECL or NECL Inputs with
Operating Range: V_CC = 0 V with V_EE = -2.375 V to -3.465 V
• RSECL Output Level (400 mV Peak-to-Peak Output), Differential
Output Only
• 50 W Internal Input Termination Resistors
• Compatible with Existing 2.5 V/3.3 V LVEP, EP, and LVEL Devices
http://onsemi.com
MARKING
DIAGRAM*
FCBGA-16
BA SUFFIX
CASE 489
SG
11
LYW
QFN-16
MN SUFFIX
CASE 485G
SG11
ALYW
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
*For further details, refer to Application Note
AND8002/D
ORDERING INFORMATION
Device
Package
Shipping
NBSG11BA
NBSG11BAR2
4x4 mm
FCBGA-16
4x4 mm
FCBGA-16
100 Units / Tray
500 / Tape & Reel
NBSG11MN
NBSG11MNR2
3x3 mm
QFN-16
3x3 mm
QFN-16
123 Units / Rail
3000 / Tape & Reel
Board
NBSG11BAEVB
Description
NBSG11BA Evaluation Board
© Semiconductor Components Industries, LLC, 2003
1
April, 2003 - Rev. 6
Publication Order Number:
NBSG11/D