NBA3N206S Datasheet, PDF (1/18 Pages) ON Semiconductor – 3.3 V Automotive Grade M-LVDS Driver Receiver

NBA3N206S
3.3 V Automotive Grade
M-LVDS Driver Receiver
Description
The NBA3N206S is a 3.3 V supply differential Multipoint Low
Voltage (M−LVDS) line Driver and Receiver for automotive
applications. NBA3N206S offers the Type 2 receiver threshold at
0.1 V.
The NBA3N206S has Type−2 receivers that detect the bus state with
as little as 50 mV of differential input voltage over a common−mode
voltage range of −1 V to 3.4 V. Type−2 receivers include an offset
threshold to provide a detectable voltage under open−circuit, idle−bus,
and other faults conditions.
NBA3N206S supports Simplex or Half Duplex bus configurations.
Features
• Low−Voltage Differential 30 W to 55 W Line Drivers and Receivers
for Signaling Rates Up to 200 Mbps
• Type−2 Receivers Provide an Offset (100 mV) Threshold to Detect
Open−Circuit and Idle−Bus Conditions
• Controlled Driver Output Voltage Transition Times for Improved
Signal Quality
• −1 V to 3.4 V Common−Mode Voltage Range Allows Data Transfer
With up to 2 V of Ground Noise
• Bus Pins High Impedance When Disabled or VCC ≤ 1.5 V
• M−LVDS Bus Power Up/Down Glitch Free
• Operating range: VCC = 3.3 ±10% V( 3.0 to 3.6 V)
• Operation from –40°C to +125°C.
• AEC−Q100 Qualified and PPAP Capable
• These are Pb−Free Devices
Applications
• Low−Power High−Speed Short−Reach Alternative to TIA/EIA−485
• Backplane or Cabled Multipoint Data and Clock Transmission
• Cellular Base Stations
• Central−Office Switches
• Network Switches and Routers
• Automotive
www.onsemi.com
8
1
SOIC−8
D SUFFIX
CASE 751
MARKING
DIAGRAM
8
NA206
AYWW
G
1
NA206
A
Y
WW
G or G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 17 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
October, 2015 − Rev. 3
Publication Order Number:
NBA3N206S/D