NB7V32M Datasheet, PDF (1/9 Pages) ON Semiconductor – 1.8V / 2.5V, 10GHz ÷2 Clock Divider with CML Outputs

NB7V32M
1.8V / 2.5V, 10GHz ÷2 Clock
Divider with CML Outputs
Multi−Level Inputs w/ Internal
Termination
Description
The NB7V32M is a differential B2 Clock divider with
asynchronous reset. The differential Clock inputs incorporate internal
50 W termination resistors and will accept LVPECL, CML and LVDS
logic levels.
The NB7V32M produces a B2 output copy of an input Clock
operating up to 10 GHz with minimal jitter.
The RESET Pin is asserted on the rising edge. Upon power−up, the
internal flip−flops will attain a random state; the Reset allows for the
synchronization of multiple NB7V32M’s in a system.
The 16 mA differential CML output provides matching internal
50 W termination which guarantees 400 mV output swing when
externally receiver terminated with 50 W to V_CC .
The NB7V32M is the 1.8 V/2.5 V version of the NB7L32M
(2.5 V/3.3 V) and is offered in a low profile 3 mm x 3 mm 16−pin
QFN package. The NB7V32M is a member of the GigaComm™
family of high performance clock products. Application notes,
models, and support documentation are available at
www.onsemi.com.
Features
• Maximum Input Clock Frequency > 10 GHz, typical
• Random Clock Jitter < 0.8 ps RMS
• 200 ps Typical Propagation Delay
• 35 ps Typical Rise and Fall Times
• Differential CML Outputs, 400 mV Peak−to−Peak, Typical
• Operating Range: V_CC = 1.71 V to 2.625 V with GND = 0 V
• Internal 50 W Input Termination Resistors
• QFN−16 Package, 3 mm x 3 mm
• −40°C to +85°C Ambient Operating Temperature
• These are Pb−Free Devices
http://onsemi.com
1
QFN−16
MN SUFFIX
CASE 485G
MARKING
DIAGRAM*
16
1
NB7V
32M
ALYWG
G
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
R
VTCLK
50W
CLK
RESET
Q
B2
Q
CLK
50W
VTCLK
VREFAC
Figure 1. Simplified Logic Diagram
© Semiconductor Components Industries, LLC, 2009
November, 2009 − Rev. 4
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
1
Publication Order Number:
NB7V32M/D