|
NB6L72_09 Datasheet, PDF (1/11 Pages) ON Semiconductor – 2.5V / 3.3V Differential 2 X 2 Crosspoint Switch with LVPECL Outputs | |||
|
NB6L72
2.5V / 3.3V Differential 2 X 2
Crosspoint Switch with
LVPECL Outputs
Multi-Level Inputs w/ Internal Termination
http://onsemi.com
Description
The NB6L72 is a clock or data high-bandwidth fully differential 2 x
2 Crosspoint Switch with internal source termination and LVPECL
output structure, optimized for low skew and minimal jitter. The
differential inputs incorporate internal 50 W termination resistors and
will accept LVPECL, CML, LVDS, LVCMOS, or LVTTL logic levels.
The SELECT inputs are single-ended and can be driven with
LVCMOS/LVTTL.
The differential LVPECL outputs provide 800 mV output swings
when externally terminated with a 50 W resistor to VCC â 2.0 V.
The device is offered in a small 3 mm x 3 mm 16-pin QFN package.
The NB6L72 is a member of the ECLinPS MAXt family of high
performance clock and data management products.
Features
â¢ÄInput Clock Frequency > 3.0GHz
â¢ÄInput Data Rate > 3 Gb/s
â¢Ä425 ps Typical Propagation Delay
â¢Ä100 ps Typical Rise and Fall Times
â¢Ä0.5 ps maximum RMS Clock Jitter
â¢ÄLVPECL, CML or LVDS Input Compatible
â¢ÄDifferential LVPECL Outputs, 800 mV Amplitude, Typical
â¢ÄOperating Range: VCC = 2.375 V to 3.63 V with GND = 0 V
â¢ÄInternal 50 W Input Termination Provided
â¢ÄFunctionally Compatible with Existing 2.5 V/3.3 V LVEL, LVEP, EP,
and SG Devices
â¢Ä-40°C to +85°C Ambient Operating Temperature
â¢ÄThese are Pb-Free Devices
1
QFN-16
MN SUFFIX
CASE 485G
MARKING
DIAGRAM*
16
1
NB6L
72
ALYWG
G
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
婀 Semiconductor Components Industries, LLC, 2008
1
April, 2008 - Rev. 4
Publication Order Number:
NB6L72/D
|
▷ |