NB3N5573_16 Datasheet, PDF (1/8 Pages) ON Semiconductor – Dual HCSL Clock Generator

NB3N5573
3.3 V, Crystal to 25 MHz,
100 MHz, 125 MHz and
200 MHz Dual HCSL Clock
Generator
Description
The NB3N5573 is a precision, low phase noise clock generator that
supports PCI Express and Ethernet requirements. The device accepts a
25 MHz fundamental mode parallel resonant crystal and generates a
differential HCSL output at 25 MHz, 100 MHz, 125 MHz or 200 MHz
clock frequencies. Outputs can interface with LVDS with proper
termination (See Figure 4).
This device is housed in 5.0 mm x 4.4 mm narrow body TSSOP 16
pin package.
Features
• Uses 25 MHz Fundamental Mode Parallel Resonant Crystal
• External Loop Filter is Not Required
• HCSL Differential Output or LVDS with Proper Termination
• Four Selectable Multipliers of the Input Frequency
• Output Enable with Tri−State Outputs
• PCIe Gen1, Gen2, Gen3 Jitter Compliant
• Phase Noise: @ 100 MHz
Offset Noise Power
100 Hz −109.4 dBc
1 kHz −127.8 dBc
10 kHz −136.2 dBc
100 kHz −138.8 dBc
1 MHz −138.2 dBc
10 MHz −161.4 dBc
20 MHz −163.00 dBc
• Typical Period Jitter RMS of 1.5 ps
• Operating Range 3.3 V ±10%
• Industrial Temperature Range −40°C to +85°C
• These are Pb−Free Devices
www.onsemi.com
16
1
TSSOP−16
DT SUFFIX
CASE 948F
MARKING
DIAGRAM
16
NB3N
5573
ALYWG
1
G
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
VDD
X1/CLK
25 MHz Clock or
Crystal X2
Clock Buffer
Crystal Oscillator
Phase
Detector
Charge
Pump
BM
VCO
HSCL
Output
HSCL
Output
CLK0
CLK0
CLK1
CLK1
GND
S0
Figure 1. NB3N5573 Simplified Logic Diagram
S1 OE IREF
© Semiconductor Components Industries, LLC, 2016
1
July, 2016 − Rev. 10
Publication Order Number:
NB3N5573/D