NB3L02 Datasheet, PDF (1/4 Pages) ON Semiconductor – 2.8 V, High Precision 1:2 Clock Fanout Buffer

NB3L02
2.8 V, High Precision 1:2
Clock Fanout Buffer
Description
The NB3L02 is a low−skew, low jitter 1:2 clock fanout buffer, ideal
for use in portable end−equipment, such as mobile phones or tablet
applications. The MCLK_IN pin has an integrated AC coupling
capacitor and will directly accept a square or sine wave clock input,
such as a temperature compensated crystal oscillator (TCXO). The
minimum acceptable input amplitude of the sine wave is 800 mV
peak−to−peak. The NB3L02 is offered in a 0.4 mm pitch 6−ball,
wafer−level chip−scale package (WLCSP) (0.77 mm x 1.17 mm).
Features
• 800 mV Single Ended Outputs
• Low Phase Noise: −144 dbc/Hz @ 10 kHz Offset
• Ultra Small Package: 0.4 mm Pitch WLCSP6 (0.77 mm x 1.17 mm)
• Exceeds JEDEC ESD Standards: 4000 V HBM, 200 V MM
• Industrial Temperature Range: −40°C to +85°C
• These are Pb−Free Devices
PIN DESCRIPTIONS
Ball No.
Name
I/O
Description
A1
V_DD
I
A2
CLK_OUT1
O
Power Supply Voltage
Clock Output 1
B1
MCLK_IN
I
Master Clock Input
B2
GND
−
Ground
C1
GND
−
Ground
C2
CLK_OUT2
O
Clock Output 2
http://onsemi.com
WLCSP6
FC SUFFIX
CASE 567HJ
MARKING DIAGRAM
L2MG
L2 = Specific Device Code
M = Date Code
G = Pb−Free Package
PINOUT DIAGRAM
© Semiconductor Components Industries, LLC, 2013
June, 2013 − Rev. 0
Figure 1. Simplified Block Diagram
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
1
Publication Order Number:
NB3L02/D