|
N57L5125 Datasheet, PDF (1/8 Pages) ON Semiconductor – 32‐tap Digital Potentiometers (POTs) | |||
|
N57L5125
Product Preview
32âtap Digital
Potentiometers (POTs)
with 2âwire Interface
Description
N57L5125 linear-taper digital POTs perform the same function as a
mechanical potentiometer or a variable resistor. This device consists
of a fixed resistor and a wiper contact with 32-tap points that are
digitally controlled through a 2-wire up/down serial interface.
The N57L5125 is configured as a potentiometer. Three resistance
values are available: 10 kW, 50 kW and 100 kW. All devices are
available in a space-saving 6-pin SOTâ23 package.
Features
⢠0.3 mA Ultra-low Standby Current
⢠Single-supply Operation: 2.7 V to 5.5 V
⢠Glitchless Switching between Resistor Taps
⢠Power-on Reset to Midscale
⢠2-wire Up/Down Serial Interface
⢠Resistance Values: 10 kW, 50 kW and 100 kW
⢠Low Wiper Resistance: 80 W
⢠These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
⢠LCD Screen Adjustment
⢠Volume Control
⢠Mechanical Potentiometer Replacement
⢠Gain Adjustment
⢠Line Impedance Matching
www.onsemi.com
MARKING
DIAGRAM
SOTâ23
TB SUFFIX
CASE 527AJ
XXX MG
G
1
XXX = Specific Device Code
M
= Date Code
G
= PbâFree Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
SOTâ23
VDD 1
6H
GND 2
5W
U/D 3 N57L5125 4 CS
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2016
1
August, 2016 â Rev. P0
Publication Order Number:
N57L5125/D
|
▷ |