|
N01S830HA Datasheet, PDF (1/13 Pages) ON Semiconductor – 1 Mb Ultra-Low Power Serial SRAM | |||
|
N01S830HA, N01S830BA
1 Mb Ultra-Low Power
Serial SRAM
Standard SPI Interface and Multiplex
DUAL and QUAD Interface
Overview
http://onsemi.com
The ON Semiconductor serial SRAM family includes several
integrated memory devices including this 1 Mb serially accessed
Static Random Access Memory, internally organized as 128 K words
by 8 bits. The devices are designed and fabricated using
ON Semiconductorâs advanced CMOS technology to provide both
high-speed performance and low power. The devices operate with a
single chip select (CS) input and use a simple Serial Peripheral
TSSOP8 3x4.4
CASE 948BH
Interface (SPI) protocol. In SPI mode, a single data-in (SI) and
data-out (SO) line is used along with the clock (SCK) to access data
within the device. In DUAL mode, two multiplexed data-in/data-out
PACKAGE CONFIGURATION
(SIO0-SIO1) lines are used and in QUAD mode, four multiplexed
CS
1
8
VCC
data-in/data-out (SIO0-SIO3) lines are used with the clock to access
the memory. The devices can operate over a wide temperature range of
â40°C to +85°C and are available in a 8-lead TSSOP package. The
N01S830xA device has two different variations, a HOLD version that
SO / SIO1
2
NC / SIO2
3
VSS
4
7
HOLD / SIO3
6
SCK
5
SI / SIO0
allows communication to the device to be paused and a battery
HOLD Version
back-up (BBU) version to be used with a battery to retain data when
power is lost.
CS
1
SO / SIO1
2
8
VCC
7
VBAT
Features
⢠Power Supply Range: 2.5 to 5.5 V
⢠Very Low Typical Standby Current < 4 mA
⢠Very Low Operating Current < 10 mA
NC
VSS
3
6
4
5
BBU Version
SCK
SI / SIO0
⢠Simple Serial Interface
ORDERING INFORMATION
⦠Single-bit SPI Access
⦠DUAL-bit and QUAD-bit SPI-like Access
⢠Flexible Operating Modes
⦠Word Mode
⦠Page Mode
⦠Burst Mode (Full Array)
⢠High Frequency Read and Write Operation
Device
Package
N01S830HAT22I TSSOPâ8
(PbâFree)
N01S830BAT22I TSSOPâ8
(PbâFree)
N01S830HAT22IT TSSOPâ8
(PbâFree)
Shippingâ
100 Units / Tube
100 Units / Tube
3000 / Tape & Reel
⦠Clock Frequency 20 MHz
⢠Functional Options
N01S830BAT22IT TSSOPâ8 3000 / Tape & Reel
(PbâFree)
⦠HOLD Pin for Pausing Operation
⦠VBAT Pin for BatteryâBack up
⢠Built-in Write Protection (CS High)
⢠High Reliability
⦠Unlimited Write Cycles
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
⢠These Devices are PbâFree and are RoHS Compliant
⦠Green TSSOP
Table 1. DEVICE OPTIONS
Device / Part Number
N01S830HAT22I
N01S830BAT22I
Power Supply
HV 2.5 V â 5.5 V
HV 2.5 V â 5.5 V
Speed
20 MHz
20 MHz
Package
TSSOPâ8
TSSOPâ8
Function
HOLD
BBU â Battery Back-up
© Semiconductor Components Industries, LLC, 2013
1
September, 2013 â Rev. 0
Publication Order Number:
N01S830HA/D
|
▷ |