MURF1660CTG Datasheet, PDF (1/4 Pages) ON Semiconductor – Switch-mode Power Rectifier

MURF1660CTG
Switch-mode Power
Rectifier
These state−of−the−art devices are designed for use in switching
power supplies, inverters and as free wheeling diodes.
Features
• Ultrafast 60 Nanosecond Recovery Times
• 150°C Operating Junction Temperature
• Epoxy Meets UL 94 V−0 @ 0.125 in
• High Temperature Glass Passivated Junction
• Low Leakage Specified @ 150°C Case Temperature
• Current Derating @ Both Case and Ambient Temperatures
• Electrically Isolated. No Isolation Hardware Required.
• This is a Pb−Free Package*
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.9 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
MAXIMUM RATINGS (Per Leg)
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
Total Device, (Rated V_R), T_C = 150°C
Per Diode
Per Device
V_RRM
600
V
V_RWM
V_R
I_F(AV)
A
8
16
Peak Repetitive Forward Current
(Rated V_R, Square Wave, 20 kHz),
T_C = 150°C
Non−repetitive Peak Surge Current
(Surge applied at rated load conditions
halfwave, single phase, 60 Hz)
I_FM
16
A
I_FSM
100
A
Operating Junction and Storage Temperature T_J, T_stg − 65 to +150 °C
RMS Isolation Voltage
(t = 0.3 second, R.H. ≤ 30%, T_A = 25°C)
(Note 1) Per Figure 3
V_iso1
V
4500
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Proper strike and creepage distance must be provided.
www.onsemi.com
ULTRAFAST RECTIFIER
16 AMPERES, 600 VOLTS
1
2
3
MARKING
DIAGRAM
1
2
3
ISOLATED TO−220
CASE 221AH
AYWW
U1660G
AKA
A
Y
WW
U1660
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
Device
Package
Shipping
MURF1660CTG TO−220
(Pb−Free)
50 Units / Rail
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2016
1
July, 2016 − Rev. 7
Publication Order Number:
MURF1660CT/D