MUR210_06 Datasheet, PDF (1/5 Pages) ON Semiconductor – SWITCHMODE TM Power Rectifier

MUR210
Preferred Device
SWITCHMODEt
Power Rectifier
SWITCHMODE power rectifiers are state−of−the−art devices that
are designed for use in switching power supplies, inverters and as free
wheeling diodes.
Features
• Ultrafast 20 Nanosecond Recovery Times
• 175°C Operating Junction Temperature
• Low Forward Voltage
• Low Leakage Current
• High Temperature Glass Passivated Junction
• These are Pb−Free Devices*
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max for 10 Seconds, 1/16″ from Case
• Polarity: Cathode Indicated by Polarity Band
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Square Wave Mounting Method #3)
(Note 1)
Symbol
Value
Unit
V_RRM
100
V
V_RWM
−
V_R
I_F(AV)
2.0 @
A
T_A = 100°C
Non-Repetitive Peak Surge Current
I_FSM
35
A
(Surge applied at rated load conditions
halfwave, single phase, 60 Hz)
Operating Junction Temperature and
Storage Temperature Range
T_J, T_stg −65 to +175 °C
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
Maximum Thermal Resistance,
Junction−to−Ambient
R_qJA See Note 3 °C/W
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 1
http://onsemi.com
ULTRAFAST RECTIFIERS
2 AMPERES, 100 VOLTS
DO−41
PLASTIC
AXIAL LEAD
CASE 59
MARKING DIAGRAM
A
MUR210
YYWW G
G
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping^†
MUR210
Axial Lead* 1000 Units/Bag
MUR210G
MUR210RL
MUR210RLG
Axial Lead*
Axial Lead*
Axial Lead*
1000 Units/Bag
5000/Tape & Reel
5000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*This package is inherently Pb−Free.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MUR210/D