MUR210 Datasheet, PDF (1/8 Pages) ON Semiconductor – SWITCHMODEE Power Rectifier

MUR210
Preferred Device
SWITCHMODE™
Power Rectifier
. . . designed for use in switching power supplies, inverters and as
free wheeling diodes, these state–of–the–art devices have the
following features:
• Ultrafast 20 Nanosecond Recovery Times
• 175°C Operating Junction Temperature
• Low Forward Voltage
• Low Leakage Current
• High Temperature Glass Passivated Junction
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
• Shipped in plastic bags, 1000 per bag
• Available Tape and Reeled, 5000 per reel, by adding a “RL’’ suffix to
the part number
• Polarity: Cathode Indicated by Polarity Band
• Marking: MUR210
http://onsemi.com
ULTRAFAST
RECTIFIERS
2 AMPERES
100 VOLTS
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Square Wave Mounting Method #3
Per Note 1.)
V_RRM
V_RWM
V_R
I_F(AV)
100
Volts
—
2.0 @ Amps
T_A = 100°C
Non-Repetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz)
I_FSM
35
Amps
Operating Junction Temperature and
Storage Temperature Range
T_J, T_stg
–65 to
°C
+175
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.
PLASTIC
AXIAL LEAD
CASE 059
MARKING DIAGRAM
MUR210
MUR210 = Device Code
ORDERING INFORMATION
Device
Package
Shipping
MUR210
Axial Lead
1000 Units/Bag
MUR210RL Axial Lead 5000/Tape & Reel
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2000
1
September, 2000 – Rev. 0
Publication Order Number:
MUR210/D