MRA4003T3_06 Datasheet, PDF (1/5 Pages) ON Semiconductor – Surface Mount Standard Recovery Power Rectifier

MRA4003T3 Series
Surface Mount Standard
Recovery Power Rectifier
SMA Power Surface Mount Package
Features construction with glass passivation. Ideally suited for
surface mounted automotive applications.
Features
• Compact Package with J−Bend Leads Ideal for Automated Handling
• Stable, High Temperature, Glass Passivated Junction
• Pb−Free Packages are Available
Mechanical Characteristics
• Case: Molded Epoxy
Epoxy meets UL 94 V−0 @ 0.125 in
• Weight: 70 mg (Approximately)
• Finish: All External Surfaces are Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 seconds in Solder Bath
• Polarity: Band in Plastic Body Indicates Cathode Lead
• Marking: MRA4003T3 = R13
Marking MRA4004T3 = R14
MRA4005T1 = R15
Marking: MRA4005T3 = R15
Marking: MRA4006T3 = R16
Marking: MRA4007T3 = R17
MAXIMUM RATINGS
Please See the Table on the Following Page
http://onsemi.com
STANDARD RECOVERY
RECTIFIERS
1.0 AMPERES
300−1000 VOLTS
CASE 403D
SMA
PLASTIC
MARKING DIAGRAM
R1x
AYWWG
R1x = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the ordering
information section on page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
May, 2006 − Rev. 5
Publication Order Number:
MRA4003T3/D