MKP9V160 Datasheet, PDF (1/5 Pages) ON Semiconductor – Sidac High Voltage Bidirectional Triggers

MKP9V160
Preferred Device
Sidac High Voltage
Bidirectional Triggers
Bidirectional devices designed for direct interface with the ac power
line. Upon reaching the breakover voltage in each direction, the device
switches from a blocking state to a low voltage on−state. Conduction
will continue like a Triac until the main terminal current drops below
the holding current. The plastic axial lead package provides high pulse
current capability at low cost. Glass passivation insures reliable
operation.
Features
• High Pressure Sodium Vapor Lighting
• Strobes and Flashers
• Ignitors
• High Voltage Regulators
• Pulse Generators
• Used to Trigger Gates of SCR’s and Triacs
• Indicates UL Registered − File #E116110
• Pb−Free Package is Available
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off−State Voltage
V_DRM,
V
(Sine Wave, 50 to 60 Hz, T_J = − 40 to 125°C) V_RRM
"90
On-State Current RMS
(T_L = 80°C, Lead Length = 3/8″″
All Conduction Angles)
I_T(RMS)
"0.9
A
Peak Non−repetitive Surge Current
(60 Hz One Cycle Sine Wave, T_J = 125°C)
Operating Junction Temperature Range
Storage Temperature Range
THERMAL CHARACTERISTICS
I_TSM
"4.0
A
T_J −40 to +125 °C
T_stg −40 to +150 °C
Rating
Thermal Resistance, Junction−to−Lead
Lead Length = 3/8″
Symbol
Max
Unit
R_qJL
40
°C/W
Lead Solder Temperature
T_L
(Lead Length w 1/16″ from Case, 10 s Max)
260
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 1
http://onsemi.com
SIDACS ^{( )}
0.9 AMPS RMS, 160 VOLTS
MT1
MT2
DO−41
AXIAL LEAD
CASE 59
STYLE 2
MARKING DIAGRAM
A
MKP
9V160
YYWW G
G
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
MKP9V160RL
Package
Shipping^†
Axial Lead* 5000 Tape & Reel
MKP9V160RLG Axial Lead* 5000 Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MKP9V160/D