MG2040MUTAG Datasheet, PDF (1/8 Pages) ON Semiconductor – Transient Voltage Suppressors

MG2040
Transient Voltage
Suppressors
Low Capacitance ESD Protection for
High Speed Video Interface
The MG2040 transient voltage suppressor is designed specifically
to protect HDMI and Display Port with full functionality ESD
protection and back drive current protection for V_CC line. Ultra−low
capacitance and low ESD clamping voltage make this device an ideal
solution for protecting voltage sensitive high speed data lines. The
flow−through style package allows for easy PCB layout and matched
trace lengths necessary to maintain consistent impedance for the high
speed TMDS lines.
Features
• Full Function HDMI / Display Port Solution
• Single Connect, Flow through Routing for TMDS Lines
• Low Capacitance (0.35 pF Typical, I/O to GND)
• Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 (±8 kV Contact)
• UL Flammability Rating of 94 V−0
• This is a Pb−Free Device
Typical Applications
• HDMI
• Display Port
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
T_J
−55 to +125 °C
Storage Temperature Range
T_stg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
T_L
260
°C
IEC 61000−4−2 Contact (ESD)
IEC 61000−4−2 Air (ESD)
ESD
ESD
±15
kV
±15
kV
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
http://onsemi.com
MARKING
DIAGRAM
18 _UDFN18
CASE 517CP
1
2040MG
G
2040
M
G
= Specific Device Code
= Date Code
= Pb−Free Package
(*Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping
MG2040MUTAG UDFN18 3000 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
See Application Note AND8308/D for further description of
survivability specs.
© Semiconductor Components Industries, LLC, 2013
1
February, 2013 − Rev. 3
Publication Order Number:
MG2040/D