|
MG2040 Datasheet, PDF (1/8 Pages) ON Semiconductor – ESD Protection Diodes | |||
|
MG2040, SZMG2040
ESD Protection Diodes
Low Capacitance ESD Protection for
High Speed Video Interface
The MG2040 ESD protection diode is designed specifically to
protect HDMI and Display Port with full functionality ESD protection
and back drive current protection for VCC line. Ultraâlow capacitance
and low ESD clamping voltage make this device an ideal solution for
protecting voltage sensitive high speed data lines. The flowâthrough
style package allows for easy PCB layout and matched trace lengths
necessary to maintain consistent impedance for the high speed TMDS
lines.
Features
⢠Full Function HDMI / Display Port Solution
⢠Single Connect, Flow through Routing for TMDS Lines
⢠Low Capacitance (0.35 pF Typical, I/O to GND)
⢠Protection for the Following IEC Standards:
IEC 61000â4â2 Level 4 (±8 kV Contact)
⢠UL Flammability Rating of 94 Vâ0
⢠SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AECâQ101 Qualified and
PPAP Capable
⢠This is a PbâFree Device
Typical Applications
⢠HDMI
⢠Display Port
http://onsemi.com
MARKING
DIAGRAM
18 UDFN18
CASE 517CP
1
2040MG
G
2040 = Specific Device Code
M
= Date Code
G
= PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping
MG2040MUTAG
UDFN18 3000 / Tape &
(PbâFree)
Reel
SZMG2040MUTAG UDFN18 3000 / Tape &
(PbâFree)
Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
TJ
â55 to +125 °C
Storage Temperature Range
Tstg
â55 to +150 °C
Lead Solder Temperature â
Maximum (10 Seconds)
TL
260
°C
IEC 61000â4â2 Contact (ESD)
IEC 61000â4â2 Air (ESD)
ESD
ESD
±15
kV
±15
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
See Application Note AND8308/D for further description of
survivability specs.
© Semiconductor Components Industries, LLC, 2014
1
June, 2014 â Rev. 4
Publication Order Number:
MG2040/D
|
▷ |