MCR72-3 Datasheet, PDF (1/6 Pages) ON Semiconductor – SENSITIVE GATE SILICON CONTROLLED RECTIFIERS

MCR72-3, MCR72-6,
MCR72-8
Sensitive Gate Silicon
Controlled Rectifiers
Reverse Blocking Thyristors
Designed for industrial and consumer applications such as
temperature, light and speed control; process and remote controls;
warning systems; capacitive discharge circuits and MPU interface.
Features
• Center Gate Geometry for Uniform Current Density
• All Diffused and Glass-Passivated Junctions for Parameter
Uniformity and Stability
• Small, Rugged Thermowatt Construction for Low Thermal
Resistance, High Heat Dissipation and Durability
• Low Trigger Currents, 200 mA Maximum for Direct Driving from
Integrated Circuits
• These are Pb−Free Devices*
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off−State Voltage (Note 1) V_DRM,
V
(T_J = *40 to 110°C, Sine Wave,
V_RRM
50 Hz to 60 Hz)
MCR72−3
100
MCR72−6
400
MCR72−8
600
On-State RMS Current
(180° Conduction Angles; T_C = 83°C)
I_T(RMS)
8.0
A
Peak Non-Repetitive Surge Current
(1/2 Cycle, 60 Hz, T_J = 110°C)
I_TSM
100
A
Circuit Fusing Considerations (t = 8.3 ms)
I²t
40
A²s
Forward Peak Gate Voltage
(t ≤ 10 ms, T_C = 83°C)
V_GM
"5.0
V
Forward Peak Gate Current
(t ≤ 10 ms, T_C = 83°C)
I_GM
1.0
A
Forward Peak Gate Power
(t ≤ 10 ms, T_C = 83°C)
P_GM
5.0
W
Average Gate Power (t = 8.3 ms, T_C = 83°C) P_G(AV)
0.75
W
Operating Junction Temperature Range
T_J −40 to +110 °C
Storage Temperature Range
T_stg −40 to +150 °C
Mounting Torque
−
8.0
in. lb.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. V_DRM and V_RRM for all types can be applied on a continuous basis. Ratings
apply for zero or negative gate voltage; however, positive gate voltage shall
not be applied concurrent with negative potential on the anode. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
www.onsemi.com
SCRs
8 AMPERES RMS
100 thru 600 VOLTS
G
A
K
1
23
TO−220AB
CASE 221A−07
STYLE 3
TO−220AB
CASE 221A−09
STYLE 3
1
23
PIN ASSIGNMENT
1
Cathode
2
Anode
3
Gate
4
Anode
MARKING AND ORDERING INFORMATION
See detailed marking, ordering, and shipping information in
the package dimensions section on page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
January, 2015 − Rev. 5
Publication Order Number:
MCR72/D