MC74LCX16373DTRG Datasheet, PDF (1/7 Pages) ON Semiconductor – Low-Voltage CMOS 16-Bit Transparent Latch

MC74LCX16373
Low-Voltage CMOS 16-Bit
Transparent Latch
With 5 V−Tolerant Inputs and Outputs
(3−State, Non−Inverting)
The MC74LCX16373 is a high performance, non−inverting 16−bit
transparent latch operating from a 2.3 V to 3.6 V supply. The device is
byte controlled. Each byte has separate Output Enable and Latch Enable
inputs. These control pins can be tied together for full 16−bit operation.
High impedance TTL compatible inputs significantly reduce current
loading to input drivers while TTL compatible outputs offer improved
switching noise performance. A V_I specification of 5.5 V allows
MC74LCX16373 inputs to be safely driven from 5.0 V devices.
The MC74LCX16373 contains 16 D−type latches with 3−state
5.0 V−tolerant outputs. When the Latch Enable (LEn) inputs are HIGH,
data on the Dn inputs enters the latches. In this condition, the latches are
transparent, i.e., a latch output will change state each time its D input
changes. When LE is LOW, the latches store the information that was
present on the D inputs a setup time preceding the HIGH−to−LOW
transition of LE. The 3−state outputs are controlled by the Output
Enable (OEn) inputs. When OE is LOW, the outputs are enabled. When
OE is HIGH, the standard outputs are in the high impedance state, but
this does not interfere with new data entering into the latches.
Features
• Designed for 2.3 to 3.6 V V_CC Operation
• 5.4 ns Maximum t_pd
• 5.0 V Tolerant − Interface Capability With 5.0 V TTL Logic
• Supports Live Insertion and Withdrawal
• I_OFF Specification Guarantees High Impedance When V_CC = 0 V
• LVTTL Compatible
• LVCMOS Compatible
• 24 mA Balanced Output Sink and Source Capability
• Near Zero Static Supply Current in All Three Logic States (20 mA)
Substantially Reduces System Power Requirements
• Latchup Performance Exceeds 500 mA
• ESD Performance: Human Body Model >2000 V;
Machine Model >200 V
• These are Pb−Free Devices*
http://onsemi.com
48
1
TSSOP−48
DT SUFFIX
CASE 1201
MARKING DIAGRAM
48
LCX16373G
AWLYYWW
1
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2010
1
July, 2010 − Rev. 8
Publication Order Number:
MC74LCX16373/D