MC74HC574A_11 Datasheet, PDF (1/9 Pages) ON Semiconductor – Octal 3-State Noninverting D Flip-Flop

MC74HC574A
Octal 3-State Noninverting
D Flip-Flop
High−Performance Silicon−Gate CMOS
The MC74HC574A is identical in pinout to the LS574. The device
inputs are compatible with standard CMOS outputs; with pull−up
resistors, they are compatible with LSTTL outputs.
Data meeting the set−up time is clocked to the outputs with the
rising edge of the Clock. The Output Enable input does not affect the
states of the flip−flops but when Output Enable is high, all device
outputs are forced to the high−impedance state. Thus, data may be
stored even when the outputs are not enabled.
The HC574A is identical in function to the HC374A but has the
flip−flop inputs on the opposite side of the package from the outputs to
facilitate PC board layout.
Features
• Output Drive Capability: 15 LSTTL Loads
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 mA
• In Compliance with the Requirements Defined by JEDEC Standard
No. 7 A
• Chip Complexity: 266 FETs or 66.5 Equivalent Gates
• These Devices are Pb−Free and are RoHS Compliant
20
1
20
1
20
1
http://onsemi.com
MARKING
DIAGRAMS
20
PDIP−20
N SUFFIX
CASE 738
1
MC74HC574AN
AWLYYWWG
20
SOIC−20
DW SUFFIX
CASE 751D
HC574A
AWLYYWWG
1
20
TSSOP−20
DT SUFFIX
CASE 948E
1
HC
574A
ALYWG
G
20
1
20
SOEIAJ−20
F SUFFIX
CASE 967
1
74HC574A
AWLYWWG
A
WL, L
YY, Y
WW, W
G or G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
1
May, 2011 − Rev. 13
Publication Order Number:
MC74HC574A/D