|
MC3488A Datasheet, PDF (1/6 Pages) ON Semiconductor – DUAL EIA-423/EIA-232D DRIVER | |||
|
Order this document by MC3488A/D
Dual EIA-423/EIA-232D
Line Driver
The MC3488A dual is singleâended line driver has been designed to
satisfy the requirements of EIA standards EIAâ423 and EIAâ232D, as well
as CCITT X.26, X.28 and Federal Standard FIDS1030. It is suitable for use
where signal wave shaping is desired and the output load resistance is
greater than 450 ohms. Output slew rates are adjustable from 1.0 µs to
100 µs by a single external resistor. Output level and slew rate are
insensitive to power supply variations. Input undershoot diodes limit
transients below ground and output current limiting is provided in both output
states.
The MC3488A has a standard 1.5 V input logic threshold for TTL or
NMOS compatibility.
⢠PNP Buffered Inputs to Minimize Input Loading
⢠Short Circuit Protection
⢠Adjustable Slew Rate Limiting
⢠MC3488A Equivalent to 9636A
⢠Output Levels and Slew Rates are Insensitive to Power
Supply Voltages
⢠No External Blocking Diode Required for VEE Supply
⢠Second Source µA9636A
MC3488A
DUAL
EIAâ423/EIAâ232D
DRIVER
SEMICONDUCTOR
TECHNICAL DATA
P1 SUFFIX
PLASTIC PACKAGE
CASE 626
D SUFFIX
PLASTIC PACKAGE
CASE 751
(SOâ8)
PIN CONNECTIONS
Wave
Shape
1
Input A 2
8 VCC
7 Output A
Input B 3
6 Output B
Gnd 4
5 VEE
ORDERING INFORMATION
Device
Operating
Temperature Range
Package
MC3488AP1
TA = 0 to +70°C
MC3488AD
Plastic DIP
SOâ8
Wave Shape
Control
TTL Logic
Simplified Application
MC3488A Driver
RSâ423 Interface
MC3486
ThreeâState Receiver
MOTOROLA ANALOG IC DEVICE DATA
© Motorola, Inc. 1996
Rev 2
1
|
▷ |