|
MC34262_05 Datasheet, PDF (1/19 Pages) ON Semiconductor – Power Factor Controllers | |||
|
MC34262, MC33262
Power Factor Controllers
The MC34262/MC33262 are active power factor controllers
specifically designed for use as a preconverter in electronic ballast
and in offâline power converter applications. These integrated
circuits feature an internal startup timer for standâalone applications,
a one quadrant multiplier for near unity power factor, zero current
detector to ensure critical conduction operation, transconductance
error amplifier, quickstart circuit for enhanced startup, trimmed
internal bandgap reference, current sensing comparator, and a totem
pole output ideally suited for driving a power MOSFET.
Also included are protective features consisting of an overvoltage
comparator to eliminate runaway output voltage due to load removal,
input undervoltage lockout with hysteresis, cycleâbyâcycle current
limiting, multiplier output clamp that limits maximum peak switch
current, an RS latch for single pulse metering, and a drive output high
state clamp for MOSFET gate protection. These devices are
available in dualâinâline and surface mount plastic packages.
Features
⢠Overvoltage Comparator Eliminates Runaway Output Voltage
⢠Internal Startup Timer
⢠One Quadrant Multiplier
⢠Zero Current Detector
⢠Trimmed 2% Internal Bandgap Reference
⢠Totem Pole Output with High State Clamp
⢠Undervoltage Lockout with 6.0 V of Hysteresis
⢠Low Startup and Operating Current
⢠Supersedes Functionality of SG3561 and TDA4817
⢠PbâFree Packages are Available
Zero Current Detector
Zero Current
5 Detect Input
2.5V
Reference
Undervoltage
Lockout
VCC
8
http://onsemi.com
POWER FACTOR
CONTROLLERS
8
1
MARKING
DIAGRAMS
PDIPâ8
P SUFFIX
CASE 626
8
MC3x262P
AWL
YYWWG
1
8
1
SOICâ8
D SUFFIX
CASE 751
8
3x262
ALYW
G
1
x
= 3 or 4
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G
= PbâFree Package
G
= PbâFree Package
Multiplier
Input 3
Multiplier,
Latch,
PWM,
Timer,
&
Logic
Multiplier
Overvoltage
Comparator
+
1.08 Vref
Error Amp
+
Vref
Quickstart
Drive Output
7
Current Sense
4 Input
PIN CONNECTIONS
Voltage Feedback
Input
1
Compensation 2
8 VCC
7 Drive Output
Multiplier Input 3
Current Sense 4
Input
6 GND
5 Zero Current
Detect Input
(Top View)
Voltage
Feedback
1 Input
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 17 of this data sheet.
GND 6
Compensation 2
Figure 1. Simplified Block Diagram
© Semiconductor Components Industries, LLC, 2005
1
November, 2005 â Rev. 9
Publication Order Number:
MC34262/D
|
▷ |