MC33171_15 Datasheet, PDF (1/15 Pages) ON Semiconductor – Low Power Operational Amplifiers

MC33171, 2, 4,
NCV33172, 4
Single Supply 3.0 V to 44 V,
Low Power Operational
Amplifiers
Quality bipolar fabrication with innovative design concepts are
employed for the MC33171/72/74, NCV33172/74 series of
monolithic operational amplifiers. These devices operate at 180 mA
per amplifier and offer 1.8 MHz of gain bandwidth product and
2.1 V/ms slew rate without the use of JFET device technology.
Although this series can be operated from split supplies, it is
particularly suited for single supply operation, since the common
mode input voltage includes ground potential (V_EE). With a
Darlington input stage, these devices exhibit high input resistance, low
input offset voltage and high gain. The all NPN output stage,
characterized by no deadband crossover distortion and large output
voltage swing, provides high capacitance drive capability, excellent
phase and gain margins, low open loop high frequency output
impedance and symmetrical source/sink AC frequency response.
The MC33171/72/74, NCV33172/74 are specified over the
industrial/automotive temperature ranges. The complete series of
single, dual and quad operational amplifiers are available in plastic as
well as the surface mount packages.
Features
• Low Supply Current: 180 mA (Per Amplifier)
• Wide Supply Operating Range: 3.0 V to 44 V or ±1.5 V to ±22 V
• Wide Input Common Mode Range, Including Ground (V_EE)
• Wide Bandwidth: 1.8 MHz
• High Slew Rate: 2.1 V/ms
• Low Input Offset Voltage: 2.0 mV
• Large Output Voltage Swing: −14.2 V to +14.2 V
(with ±15 V Supplies)
• Large Capacitance Drive Capability: 0 pF to 500 pF
• Low Total Harmonic Distortion: 0.03%
• Excellent Phase Margin: 60°
• Excellent Gain Margin: 15 dB
• Output Short Circuit Protection
• ESD Diodes Provide Input Protection for Dual and Quad
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
www.onsemi.com
8
1
8
1
PDIP−8
P SUFFIX
CASE 626
SO−8
D, VD SUFFIX
CASE 751
14
1
14
1
14
1
PDIP−14
P, VP SUFFIX
CASE 646
SO−14
D, VD SUFFIX
CASE 751A
TSSOP−14
DTB SUFFIX
CASE 948G
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 10 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
May, 2015 − Rev. 13
Publication Order Number:
MC33171/D