MC14106B_14 Datasheet, PDF (1/8 Pages) ON Semiconductor – Hex Schmitt Trigger

MC14106B
Hex Schmitt Trigger
The MC14106B hex Schmitt Trigger is constructed with MOS
P−channel and N−channel enhancement mode devices in a single
monolithic structure. These devices find primary use where low power
dissipation and/or high noise immunity is desired. The MC14106B
may be used in place of the MC14069UB hex inverter for enhanced
noise immunity or to “square up” slowly changing waveforms.
This device contains protection circuitry to guard against damage
due to high static voltages or electric fields. However, precautions
must be taken to avoid applications of any voltage higher than
maximum rated voltages to this high−impedance circuit. For proper
operation, V_in and V_out should be constrained to the range V_SS ≤ (V_in
or V_out) ≤ V_DD.
Unused inputs must always be tied to an appropriate logic voltage
level (e.g., either V_SS or V_DD). Unused outputs must be left open.
Features
• Increased Hysteresis Voltage Over the MC14584B
• Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Capable of Driving Two Low−power TTL Loads or One
Low−power Schottky TTL Load Over the Rated Temperature
Range
• Pin−for−Pin Replacement for CD40106B and MM74C14
• Can Be Used to Replace the MC14584B or MC14069UB
• NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS (Voltages Referenced to V_SS)
Symbol
Parameter
Value
Unit
V_DD
V_in, V_out
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
−0.5 to +18.0
V
−0.5 to V_DD + 0.5
V
I_in, I_out
Input or Output Current
(DC or Transient) per Pin
± 10
mA
P_D
Power Dissipation, per Package
(Note 1)
500
mW
T_A
Ambient Temperature Range
T_stg
Storage Temperature Range
T_L
Lead Temperature
(8−Second Soldering)
−55 to +125
°C
−65 to +150
°C
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Temperature Derating: “D/DW” Packages: –7.0 mW/°C From 65°C To 125°C
http://onsemi.com
SOIC−14 NB
D SUFFIX
CASE 751A
TSSOP−14
DT SUFFIX
CASE 948G
MARKING DIAGRAMS
14
14106BG
AWLYWW
1
SOIC−14 NB
14
14
106B
ALYWG
G
1
TSSOP−14
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G or G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
August, 2014 − Rev. 10
Publication Order Number:
MC14106B/D