MC14067B_13 Datasheet, PDF (1/9 Pages) ON Semiconductor – Analog Multiplexers / Demultiplexers

MC14067B
Analog Multiplexers /
Demultiplexers
The MC14067 multiplexer/demultiplexer is a digitally controlled
analog switch featuring low ON resistance and very low leakage
current. This device can be used in either digital or analog
applications.
The MC14067 is a 16−channel multiplexer/demultiplexer with an
inhibit and four binary control inputs A, B, C, and D. These control
inputs select 1−of−16 channels by turning ON the appropriate analog
switch (see MC14067 truth table.)
Features
• Low OFF Leakage Current
• Matched Channel Resistance
• Low Quiescent Power Consumption
• Low Crosstalk Between Channels
• Wide Operating Voltage Range: 3 to 18 V
• Low Noise
• Pin for Pin Replacement for CD4067B
• These Devices are Pb−Free and are RoHS Compliant
• NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
MAXIMUM RATINGS (Voltages Referenced to V_SS)
Symbol
Parameter
Value
Unit
V_DD
V_in, V_out
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
– 0.5 to + 18.0
V
– 0.5 to V_DD + 0.5
V
I_in
Input Current (DC or Transient),
per Control Pin
±10
mA
I_sw Switch Through Current
P_D Power Dissipation, per Package
(Note 1)
±25
mA
500
mW
T_A Ambient Temperature Range
T_stg Storage Temperature Range
T_L Lead Temperature
(8–Second Soldering)
– 55 to + 125
_C
– 65 to + 150
_C
260
_C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Temperature Derating:
Plastic “P and D/DW” Packages: − 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high−impedance circuit. For proper operation, V_in and V_out should be constrained
to the range V_SS v (V_in or V_out) v V_DD.
Unused inputs must always be tied to an appropriate logic voltage level
(e.g., either V_SS or V_DD). Unused outputs must be left open.
© Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. 8
http://onsemi.com
SOIC−24
DW SUFFIX
CASE 751E
MARKING DIAGRAM
14067B
AWLYYWWG
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
Publication Order Number:
MC14067B/D