|
MC14067B_05 Datasheet, PDF (1/10 Pages) ON Semiconductor – Analog Multiplexers / Demultiplexers | |||
|
MC14067B
Analog Multiplexers /
Demultiplexers
The MC14067 multiplexer/demultiplexer is a digitally controlled
analog switch featuring low ON resistance and very low leakage
current. This device can be used in either digital or analog
applications.
http://onsemi.com
The MC14067 is a 16âchannel multiplexer/demultiplexer with an
inhibit and four binary control inputs A, B, C, and D. These control
inputs select 1âofâ16 channels by turning ON the appropriate analog
MARKING
DIAGRAMS
switch (see MC14067 truth table.)
Features
⢠Low OFF Leakage Current
PDIPâ24
P SUFFIX
CASE 709
MC14067BCP
AWLYYWW
⢠Matched Channel Resistance
⢠Low Quiescent Power Consumption
⢠Low Crosstalk Between Channels
⢠Wide Operating Voltage Range: 3 to 18 V
⢠Low Noise
SOICâ24
DW SUFFIX
CASE 751E
14067B
AWLYYWW
⢠Pin for Pin Replacement for CD4067B
⢠PbâFree Packages are Available*
MAXIMUM RATINGS (Voltages Referenced to VSS)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Value
Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VDD
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin, Vout
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
â 0.5 to + 18.0
V
â 0.5 to VDD + 0.5
V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Iin
Input Current (DC or Transient),
per Control Pin
± 10
mA
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Isw Switch Through Current
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ PD Power Dissipation, per Package
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ (Note 1)
± 25
mA
500
mW
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TA Ambient Temperature Range
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Tstg Storage Temperature Range
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TL Lead Temperature
(8âSecond Soldering)
â 55 to + 125
_C
â 65 to + 150
_C
260
_C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Maximum ratings are those values beyond which device damage can occur.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Maximum ratings applied to the device are individual stress limit values (not
A
= Assembly Location
WL
= Wafer Lot
YY
= Year
WW
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Temperature Derating:
Plastic âP and D/DWâ Packages: â 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
highâimpedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS v (Vin or Vout) v VDD.
Unused inputs must always be tied to an appropriate logic voltage level
(e.g., either VSS or VDD). Unused outputs must be left open.
*For additional information on our PbâFree strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
1
February, 2005 â Rev. 5
Publication Order Number:
MC14067B/D
|
▷ |