MC14066B_14 Datasheet, PDF (1/11 Pages) ON Semiconductor – Quad Analog Switch/Quad Multiplexer

MC14066B
Quad Analog Switch/Quad
Multiplexer
The MC14066B consists of four independent switches capable of
controlling either digital or analog signals. This quad bilateral switch
is useful in signal gating, chopper, modulator, demodulator and
CMOS logic implementation.
The MC14066B is designed to be pin−for−pin compatible with the
MC14016B, but has much lower ON resistance. Input voltage swings
as large as the full supply voltage can be controlled via each
independent control input.
Features
• Triple Diode Protection on All Control Inputs
• Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Linearized Transfer Characteristics
• Low Noise − 12 nV/√Cycle, f ≥ 1.0 kHz typical
• Pin−for−Pin Replacement for CD4016, CD4016, MC14016B
• For Lower R_ON, Use The HC4066 High−Speed CMOS Device
• NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS (Voltages Referenced to V_SS)
Symbol
Parameter
Value
Unit
V_DD
V_in, V_out
DC Supply Voltage Range
Input or Output Voltage Range
(DC or Transient)
−0.5 to +18.0
V
−0.5 to V_DD + 0.5
V
I_in
Input Current (DC or Transient)
per Control Pin
±10
mA
I_SW Switch Through Current
P_D Power Dissipation, per Package
(Note 1)
±25
mA
500
mW
T_A
Ambient Temperature Range
−55 to +125
°C
T_stg Storage Temperature Range
−65 to +150
°C
T_L
Lead Temperature
(8−Second Soldering)
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Temperature Derating: “D/DW” Packages: –7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high−impedance circuit. For proper operation, V_in and V_out should be constrained
to the range V_SS ≤ (V_in or V_out) ≤ V_DD.
Unused inputs must always be tied to an appropriate logic voltage level
(e.g., either V_SS or V_DD). Unused outputs must be left open.
© Semiconductor Components Industries, LLC, 2014
1
August, 2014 − Rev. 10
http://onsemi.com
SOIC−14
D SUFFIX
CASE 751A
SOEIAJ−14
F SUFFIX
CASE 965
TSSOP−14
DT SUFFIX
CASE 948G
PIN ASSIGNMENT
IN 1 1
OUT 1 2
OUT 2 3
IN 2 4
CONTROL 2 5
CONTROL 3 6
V_SS 7
14 V_DD
13 CONTROL 1
12 CONTROL 4
11 IN 4
10 OUT 4
9 OUT 3
8 IN 3
MARKING DIAGRAMS
14
14066BG
AWLYWW
1
SOIC−14
14
MC14066B
ALYWG
1
SOEIAJ−14
14
14
066B
ALYWG
G
1
TSSOP−14
A
WL, L
YY, Y
WW, W
G or G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
Publication Order Number:
MC14066B/D