MC14066B Datasheet, PDF (1/12 Pages) ON Semiconductor – Quad Analog Switch/Quad Multiplexer

MC14066B
Quad Analog Switch/Quad
Multiplexer
The MC14066B consists of four independent switches capable of
controlling either digital or analog signals. This quad bilateral switch
is useful in signal gating, chopper, modulator, demodulator and
CMOS logic implementation.
The MC14066B is designed to be pin–for–pin compatible with the
MC14016B, but has much lower ON resistance. Input voltage swings
as large as the full supply voltage can be controlled via each
independent control input.
• Triple Diode Protection on All Control Inputs
• Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Linearized Transfer Characteristics
• Low Noise — 12 nV/√Cycle, f ≥ 1.0 kHz typical
• Pin–for–Pin Replacement for CD4016, CD4016, MC14016B
• For Lower R_ON, Use The HC4066 High–Speed CMOS Device
MAXIMUM RATINGS (Voltages Referenced to V_SS) (Note 2.)
Symbol
Parameter
Value
Unit
V_DD
DC Supply Voltage Range
– 0.5 to +18.0
V
V_in, V_out Input or Output Voltage Range – 0.5 to V_DD + 0.5
V
(DC or Transient)
I_in
Input Current (DC or Transient)
± 10
mA
per Control Pin
I_SW
Switch Through Current
P_D
Power Dissipation,
per Package (Note 3.)
± 25
mA
500
mW
T_A
Ambient Temperature Range
T_stg
Storage Temperature Range
T_L
Lead Temperature
(8–Second Soldering)
– 55 to +125
°C
– 65 to +150
°C
260
°C
2. Maximum Ratings are those values beyond which damage to the device
may occur.
3. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
v v ^{high–impedance circuit. For proper operation, Vin and Vout should be constrained}
to the range V_SS (V_in or V_out) V_DD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g.,
either V_SS or V_DD). Unused outputs must be left open.
© Semiconductor Components Industries, LLC, 2000
1
March, 2000 – Rev. 3
http://onsemi.com
PDIP–14
P SUFFIX
CASE 646
SOIC–14
D SUFFIX
CASE 751A
TSSOP–14
DT SUFFIX
CASE 948G
MARKING
DIAGRAMS
14
MC14066BCP
AWLYYWW
1
14
14066B
AWLYWW
1
14
14
066B
ALYW
SOEIAJ–14
F SUFFIX
CASE 965
1
14
MC14066B
AWLYWW
1
A
= Assembly Location
WL or L = Wafer Lot
YY or Y = Year
WW or W = Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC14066BCP
PDIP–14
2000/Box
MC14066BD
SOIC–14
55/Rail
MC14066BDR2 SOIC–14 2500/Tape & Reel
MC14066BDT
TSSOP–14
96/Rail
MC14066BDTEL TSSOP–14 2000/Tape & Reel
MC14066BDTR2 TSSOP–14 2500/Tape & Reel
MC14066BF
SOEIAJ–14 See Note 1.
MC14066BFEL SOEIAJ–14 See Note 1.
1. For ordering information on the EIAJ version of
the SOIC packages, please contact your local
ON Semiconductor representative.
Publication Order Number:
MC14066B/D