MC14060B Datasheet, PDF (1/8 Pages) ON Semiconductor – 14-Bit Binary Counter and Oscillator

MC14060B
14-Bit Binary Counter and
Oscillator
The MC14060B is a 14–stage binary ripple counter with an on–chip
oscillator buffer. The oscillator configuration allows design of either
RC or crystal oscillator circuits. Also included on the chip is a reset
function which places all outputs into the zero state and disables the
oscillator. A negative transition on Clock will advance the counter to
the next state. Schmitt trigger action on the input line permits very
slow input rise and fall times. Applications include time delay circuits,
counter controls, and frequency dividing circuits.
• Fully static operation
• Diode Protection on All Inputs
• Supply Voltage Range = 3.0 V to 18 V
• Capable of Driving Two Low–power TTL Loads or One Low–power
Schottky TTL Load Over the Rated Temperature Range
• Buffered Outputs Available from Stages 4 Through 10 and
12 Through 14
• Common Reset Line
• Pin–for–Pin Replacement for CD4060B
MAXIMUM RATINGS (Voltages Referenced to V_SS) (Note 2.)
Symbol
Parameter
Value
Unit
V_DD
DC Supply Voltage Range
– 0.5 to +18.0
V
V_in, V_out Input or Output Voltage Range – 0.5 to V_DD + 0.5
V
(DC or Transient)
I_in, I_out
Input or Output Current
(DC or Transient) per Pin
± 10
mA
P_D
Power Dissipation,
per Package (Note 3.)
500
mW
T_A
Ambient Temperature Range
T_stg
Storage Temperature Range
T_L
Lead Temperature
(8–Second Soldering)
– 55 to +125
°C
– 65 to +150
°C
260
°C
2. Maximum Ratings are those values beyond which damage to the device
may occur.
3. Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
v v ^{high–impedance circuit. For proper operation, Vin and Vout should be constrained}
to the range V_SS (V_in or V_out) V_DD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g.,
either V_SS or V_DD). Unused outputs must be left open.
http://onsemi.com
PDIP–16
P SUFFIX
CASE 648
MARKING
DIAGRAMS
16
MC14060BCP
AWLYYWW
1
SOIC–16
D SUFFIX
CASE 751B
16
14060B
AWLYWW
1
16
TSSOP–16
DT SUFFIX
CASE 948F
14
060B
ALYW
SOEIAJ–16
F SUFFIX
CASE 966
1
16
MC14060B
AWLYWW
1
A
= Assembly Location
WL or L = Wafer Lot
YY or Y = Year
WW or W = Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC14060BCP
PDIP–16
2000/Box
MC14060BD
SOIC–16
2400/Box
MC14060BDR2 SOIC–16 2500/Tape & Reel
MC14060BDT
TSSOP–16
96/Rail
MC14060BDTR2 TSSOP–16 2500/Tape & Reel
MC14060BF
SOEIAJ–16 See Note 1.
MC14060BFEL SOEIAJ–16 See Note 1.
1. For ordering information on the EIAJ version of
the SOIC packages, please contact your local
ON Semiconductor representative.
© Semiconductor Components Industries, LLC, 2000
1
March, 2000 – Rev. 3
Publication Order Number:
MC14060B/D