MC14051B_14 Datasheet, PDF (1/11 Pages) ON Semiconductor – Analog Multiplexers/Demultiplexers

MC14051B, MC14052B,
MC14053B
Analog
Multiplexers/Demultiplexers
The MC14051B, MC14052B, and MC14053B analog multiplexers
are digitally−controlled analog switches. The MC14051B effectively
implements an SP8T solid state switch, the MC14052B a DP4T, and
the MC14053B a Triple SPDT. All three devices feature low ON
impedance and very low OFF leakage current. Control of analog
signals up to the complete supply voltage range can be achieved.
Features
• Triple Diode Protection on Control Inputs
• Switch Function is Break Before Make
• Supply Voltage Range = 3.0 Vdc to 18 Vdc
• Analog Voltage Range (V_DD − V_EE) = 3.0 to 18 V
Note: V_EE must be ≤ V_SS
• Linearized Transfer Characteristics
• Low−noise − 12 nV/√Cycle, f ≥ 1.0 kHz Typical
• Pin−for−Pin Replacement for CD4051, CD4052, and CD4053
• For 4PDT Switch, See MC14551B
• For Lower R_ON, Use the HC4051, HC4052, or HC4053
High−Speed CMOS Devices
• NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
MAXIMUM RATINGS (Voltages Referenced to V_SS)
Symbol
Parameter
Value
Unit
V_DD DC Supply Voltage Range
(Referenced to V_EE, V_SS ≥ V_EE)
−0.5 to +18.0 V
V_in, Input or Output Voltage Range
−0.5 to V_DD + 0.5 V
V_out (DC or Transient) (Referenced to V_SS for
Control Inputs and V_EE for Switch I/O)
I_in Input Current (DC or Transient)
per Control Pin
+10
mA
I_SW Switch Through Current
±25
mA
P_D Power Dissipation per Package (Note 1)
500
mW
T_A Ambient Temperature Range
−55 to +125
°C
T_stg Storage Temperature Range
−65 to +150
°C
T_L Lead Temperature (8−Second Soldering)
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Temperature Derating: “D/DW” Packages: –7.0 mW/_C From 65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high−impedance circuit. For proper operation, V_in and V_out should be constrained to
the range V_SS ≤ (V_in or V_out) ≤ V_DD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either
V_SS, V_EE or V_DD). Unused outputs must be left open.
http://onsemi.com
1
SOIC−16
D SUFFIX
CASE 751B
1
TSSOP−16
DT SUFFIX
CASE 948F
MARKING DIAGRAMS
16
1405xBG
AWLYWW
1
SOIC−16
16
14
05xB
ALYWG
G
1
TSSOP−16
x
A
WL, L
Y
WW, W
G or G
= 1, 2, or 3
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
August, 2014 − Rev. 14
Publication Order Number:
MC14051B/D