MC10H605 Datasheet, PDF (1/7 Pages) ON Semiconductor – Registered Hex ECL to TTL Translator

MC10H605, MC100H605
Registered Hex ECL to TTL
Translator
Description
The MC10/100H605 is a 6−bit, registered, dual supply ECL to TTL
translator. The device features differential ECL inputs for both data
and clock. The TTL outputs feature balanced 24 mA sink/source
capabilities for driving transmission lines.
With its differential ECL inputs and TTL outputs the H605 device is
ideally suited for the receive function of a HPPI bus type
board−to−board interface application. The on chip registers simplify
the task of synchronizing the data between the two boards.
A V_BB reference voltage is supplied for use with single−ended data
or clock. For single−ended applications the V_BB output should be
connected to the “bar” inputs (Dn or CLK) and bypassed to ground via
a 0.01 mF capacitor. To minimize the skew of the device differential
clocks should be used.
The ECL level Master Reset pin is asynchronous and common to all
flip−flops. A “HIGH” on the Master Reset forces the Q outputs
“LOW”.
The device is available in either ECL standard: the 10H device is
compatible with MECL 10H™ logic levels while the 100H device is
compatible with 100K logic levels.
Features
• Differential ECL Data and Clock Inputs
• 24 mA Sink, 24 mA Source TTL Outputs
• Dual Power Supply
• Multiple Power and Ground Pins to Minimize Noise
• 2.0 ns Part−to−Part Skew
• Pb−Free Packages are Available*
http://onsemi.com
281
PLCC−28
FN SUFFIX
CASE 776
MARKING DIAGRAM*
1 28
MCxxxH605G
AWLYYWW
xxx = 10 or 100
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2009
1
September, 2009 − Rev. 8
Publication Order Number:
MC10H605/D