MC10H424_06 Datasheet, PDF (1/5 Pages) ON Semiconductor – Quad TTL to ECL Translator with ECL Strobe

MC10H424
Quad TTL to ECL Translator
with ECL Strobe
Description
The MC10H424 is a Quad TTL−to−ECL translator with an ECL
strobe. Power supply requirements are ground, +5.0 V, and −5.2 V.
Features
• Propagation Delay, 1.5 ns Typical
• Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range)
• Voltage Compensated
• MECL 10K™ Compatible
• Pb−Free Packages are Available*
5
4
6
2
7
3
1
10
12
15
11
13
14
GND = PIN 16
V_CC (+5.0 VDC) = PIN 9
V_EE (−5.2 VDC) = PIN 8
Figure 1. Logic Diagram
B_OUT
1
A_OUT
2
B_OUT
3
A_OUT
4
A_IN
5
COMMON
STROBE
6
B_IN
7
V_EE
8
16
GND
15
C_OUT
14
D_OUT
13
D_OUT
12
C_OUT
11
D_IN
10
C_IN
9
V_CC
Pin assignment is for Dual−in−Line Package.
Figure 2. Pin Assignment
For PLCC pin assignment see TND309/D (http://www.onsemi.com),
page 9, Pin Conversion Table.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
http://onsemi.com
MARKING DIAGRAMS*
16
1
PDIP−16
P SUFFIX
CASE 648
16
MC10H424P
AWLYYWWG
1
20 ₁
PLLC−20
FN SUFFIX
CASE 775
1 20
10H424G
AWLYYWW
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
August, 2006 − Rev. 10
Publication Order Number:
MC10H424/D