MC10H334_06 Datasheet, PDF (1/5 Pages) ON Semiconductor – Quad Bus Driver/Receiver with Transmit and Receiver Latches

MC10H334
Quad Bus Driver/Receiver
with Transmit and Receiver
Latches
Description
The MC10H334 is a Quad Bus Driver/Receiver with transmit and
receiver latches. When disabled, (OE = high) the bus outputs will fall
to −2.0 V. Data to be transmitted or received is passed through its
respective latch when the respective latch enable (DLE and RLE) is at
a low level. Information is latched on the positive transition of DLE
and RLE. The parameters specified are with 25 W loading on the bus
drivers and 50 W loads on the receivers.
Features
• Propagation Delay, 1.6 ns Typical Data−to−Output
• Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range)
• Voltage Compensated
• MECL 10K™ Compatible
• Pb−Free Packages are Available*
V_CC
1
20
V_CC03
BUS1
2
19
BUS2
BUS0
3
18
BUS3
VCC02
4
17
OE
D1
5
16
D2
D0
6
15
D3
DLE
7
14
RLE
R0
8
13
R3
R1
9
12
R2
V_EE
10
11
V_CC02
Figure 1. Pin Assignment
Pin assignment is for Dual−in−Line Package.
http://onsemi.com
MARKING DIAGRAMS*
CDIP−20
L SUFFIX
CASE 732
MC10H352L
AWLYYWW
1 20
20 ₁
PLLC−20
FN SUFFIX
CASE 775
10H334G
AWLYYWW
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 7
Publication Order Number:
MC10H334/D