MC10H332_06 Datasheet, PDF (1/5 Pages) ON Semiconductor – Dual Bus Driver/Receiver with 4-to-1 Output Multiplexers

MC10H332
Dual Bus Driver/Receiver
with 4−to−1 Output
Multiplexers
Description
The MC10H332 is a Dual Bus Driver/Receiver with four−to−one
output multiplexers. These multiplexers have common selects and
output enable. When disabled, (OE = high) the bus outputs go to
−2.0 V. The parameters specified are with 25 W loading on the bus
drivers and 50 W loads on the receivers.
Features
• Propagation Delay, 1.5 ns Typical Data−to−Output
• Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range)
• Voltage Compensated
• MECL 10K™ Compatible
• Pb−Free Packages are Available*
DIP & PLLC
PIN ASSIGNMENT
V_CC
1
20
V_CC02
X_BUS
2
19
Y_BUS
X0
3
18
OE
X1
4
17
Y0
X2
5
16
Y1
X3
6
15
Y2
S0
7
14
Y3
S1
8
13
RE
X_IN
9
12
Y_IN
V_EE
10
11
V_CC01
Pin assignment is for Dual−in−Line Package..
NOTE:
Each MECL 10H series circuit has been designed to meet the dc specifications
shown in the test table, after thermal equilibrium has been established. The circuit
is in a test socket or mounted on a printed circuit board and transverse air flow
greater than 500 lfpm is maintained. Receiver outputs are terminated through a
50 W resistor to −2.0 Vdc. Bus outputs are terminated through a 25 W resistor to
−2.0 Vdc.
http://onsemi.com
MARKING DIAGRAMS*
MC10H352P
AWLYYWWG
PDIP−20
P SUFFIX
CASE 738
20 ₁
PLLC−20
FN SUFFIX
CASE 775
1 20
10H332G
AWLYYWW
A
= Assembly Location
WL = Wafer Lot
YY
= Year
WW = Work Week
G
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 7
Publication Order Number:
MC10H332/D