MC10H115_06 Datasheet, PDF (1/6 Pages) ON Semiconductor – Quad Line Receiver

MC10H115
Quad Line Receiver
Description
The MC10H115 is a quad differential amplifier designed for use in
sensing differential signals over long lines. This 10H part is a
functional/ pinout duplication of the standard MECL 10K™ family
part, with 100% improvement in counting frequency and no increase
in power supply current.
The base bias supply (V_BB) is made available at Pin 9 to make the
device useful as a Schmitt trigger, or in other applications where a
stable reference voltage is necessary. Active current sources provide
the MC10H115 with excellent common mode rejection. If any
amplifier in a package is not used, one input of that amplifier must be
connected to V_BB (Pin 9) to prevent upsetting the current source bias
network.
The MC10H115 is designed to be used in sensing differential
signals over long lines. The bias supply (V_BB) is made available to
make the device useful as a Schmitt trigger, or in other applications
where a stable reference voltage is necessary.
Active current sources provide these receivers with excellent
common−mode noise rejection. If any amplifier in a package is not
used, one input of that amplifier must be connected to V_BB to prevent
unbalancing the current source bias network.
The MC10H115 does not have internal input pulldown resistors.
This provides high impedance to the amplifier input and facilitates
differential connections.
Features
• Propagation Delay, 1.0 ns Typical
• Power Dissipation 110 mW Typ/Pkg (No Load)
• Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range)
• Voltage Compensated
• MECL 10K Compatible
Applications
• Low Level Receiver
• Voltage Level Interface
• Schmitt Trigger
• Pb−Free Packages are Available*
http://onsemi.com
MARKING DIAGRAMS*
CDIP−16
L SUFFIX
CASE 620A
16
MC10H115L
AWLYYWW
1
16
16
1
PDIP−16
P SUFFIX
CASE 648
MC10H115P
AWLYYWWG
1
10H115
ALYWG
SOEIAJ−16
CASE 966
1 20
20 ₁
PLLC−20
FN SUFFIX
CASE 775
10H115G
AWLYYWW
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G
= Pb−Free Package
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
February, 2006 − Rev. 7
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
Publication Order Number:
MC10H115/D