MC10EP90_06 Datasheet, PDF (1/9 Pages) ON Semiconductor – −3.3V / −5V Triple ECL Input to LVPECL/PECL Output Translator

MC10EP90, MC100EP90
−3.3V / −5V Triple ECL Input
to LVPECL/PECL Output
Translator
Description
The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL
translator. The device receives differential LVECL or ECL signals and
translates them to differential LVPECL or PECL output signals.
A V_BB output is provided for interfacing with Single−Ended LVECL
or ECL signals at the input. If a Single−Ended input is to be used the
V_BB output should be connected to the D input. The active signal would
then drive the D input. When used the V_BB output should be bypassed
to ground by a 0.01 mF capacitor. The V_BB output is designed to act as
the switching reference for the EP90 under Single−Ended input
switching conditions, as a result this pin can only source/sink up to
0.5 mA of current.
To accomplish the level translation the EP90 requires three power
rails. The V_CC supply should be connected to the positive supply, and
the V_EE connected to the negative supply.
The 100 Series contains temperature compensation.
Features
• 260 ps Typical Propagation Delay
• Maximum Frequency > 3 GHz Typical
• Voltage Supplies V_CC = 3.0 V to 5.5 V, V_EE = −3.0 V to −5.5 V,
GND = 0 V
• Open Input Default State
• Safety Clamp on Inputs
• Fully Differential Design
• Q Output Will Default LOW with Inputs Open or at V_EE
• V_BB Output
• These are Pb−Free Devices*
http://onsemi.com
TSSOP−20
DT SUFFIX
CASE 948E
MARKING DIAGRAM*
20
xxxx
EP90
ALYWG
G
1
xxxx = MC10 or 100
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
1
November, 2006 − Rev. 6
Publication Order Number:
MC10EP90/D