|
MC10EP16T_16 Datasheet, PDF (1/11 Pages) ON Semiconductor – ECL Differential Receiver/Driver | |||
|
MC10EP16T, MC100EP16T
3.3âV / 5âVâECL Differential
Receiver/Driver with
Internal Termination
Description
The EP16T is a worldâclass differential receiver/driver. The device
is functionally equivalent to the EP16 with internal termination
resistors. A 50 W resistor is connected from the D input to the VT pin
and from the D input to the VT pin. Tie the VT and VT pins to VTT
supply (VCC â 2 V) for parallel termination or connect VT and VT
pins for 100 W input series termination.
Special considerations are required for differential inputs under No
Signal conditions to prevent instability.
The 100 Series contains temperature compensation.
Features
⢠220 ps Typical Propagation Delay
⢠Maximum Frequency > 3 GHz Typical
⢠PECL Mode Operating Range:
⦠VCC = 3.0 V to 5.5 V with VEE = 0 V
⢠NECL Mode Operating Range:
⦠VCC = 0 V with VEE = â3.0 V to â5.5 V
⢠Internal 50 W Termination Resistors
⢠These Devices are Pb-Free, Halogen Free and are RoHS Compliant
http://onsemi.com
8
1
SOICâ8 NB
D SUFFIX
CASE
751â07
8
1
TSSOPâ8
DT SUFFIX
CASE
948Râ02
DFNâ8
MN SUFFIX
CASE 506AA
MARKING DIAGRAMS*
8
HEP61
ALYW
G
1
8
HP61
ALYWG
G
1
14
8
KEP61
ALYW
G
1
8
KP61
ALYWG
G
1
14
H = MC10
A = Assembly Location
K = MC100
L = Wafer Lot
5M = MC10
Y = Year
3D = MC100
W = Work Week
M = Date Code G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information on page 8 of
this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
July, 2016 â Rev. 7
Publication Order Number:
MC10EP16T/D
|
▷ |