MC10EP16T_06 Datasheet, PDF (1/11 Pages) ON Semiconductor – 3.3V / 5V ECL Differential Receiver/Driver with Internal Termination

MC10EP16T, MC100EP16T
3.3V / 5V ECL Differential
Receiver/Driver with
Internal Termination
Description
The EP16T is a world−class differential receiver/driver. The device
is functionally equivalent to the EP16 with internal termination
resistors. A 50 W resistor is connected from the D input to the VT pin
and from the D input to the VT pin. Tie the VT and VT pins to VTT
supply (V_CC − 2 V) for parallel termination or connect VT and VT
pins for 100 W input series termination.
Special considerations are required for differential inputs under No
Signal conditions to prevent instability.
The 100 Series contains temperature compensation.
Features
• 220 ps Typical Propagation Delay
• Maximum Frequency > 3 GHz Typical
• PECL Mode Operating Range: V_CC = 3.0 V to 5.5 V
with V_EE = 0 V
• NECL Mode Operating Range: V_CC = 0 V
with V_EE = −3.0 V to −5.5 V
• Internal 50 W Termination Resistors
• Pb−Free Packages are Available
http://onsemi.com
8
1
SOIC−8
D SUFFIX
CASE 751
MARKING DIAGRAMS*
8
HEP61
ALYW
G
1
8
KEP61
ALYW
G
1
8
1
TSSOP−8
DT SUFFIX
CASE 948R
8
HP61
ALYWG
G
1
8
KP61
ALYWG
G
1
DFN8
MN SUFFIX
CASE 506AA
14
14
H = MC10
A = Assembly Location
K = MC100
L = Wafer Lot
5M = MC10
Y = Year
3D = MC100
W = Work Week
M = Date Code G = Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
December, 2006 − Rev. 5
Publication Order Number:
MC10EP16T/D