|
MC10EP16T Datasheet, PDF (1/8 Pages) ON Semiconductor – 3.3V / 5V ECL Differential Receiver/Driver with Internal Termination | |||
|
MC10EP16T, MC100EP16T
3.3V / 5VÄECL Differential
Receiver/Driver with
Internal Termination
The EP16T is a worldâclass differential receiver/driver. The device
is functionally equivalent to the EP16 with internal termination
resistors. A 50 W resistor is connected from the D input to the VT pin
and from the D input to the VT pin. Tie the VT and VT pins to VTT
supply (VCC â 2 V) for parallel termination or connect VT and VT
pins for 100 W input series termination.
Special considerations are required for differential inputs under No
Signal conditions to prevent instability.
The 100 Series contains temperature compensation.
⢠220 ps Typical Propagation Delay
⢠Maximum Frequency > 3 GHz Typical
⢠PECL Mode Operating Range: VCC = 3.0 V to 5.5 V
with VEE = 0 V
⢠NECL Mode Operating Range: VCC = 0 V
with VEE = â3.0 V to â5.5 V
⢠Internal 50 W Termination Resistors
http://onsemi.com
MARKING DIAGRAMS*
8
1
SOâ8
D SUFFIX
CASE 751
8
8
HEP61
ALYW
KEP61
ALYW
1
1
8
1
TSSOPâ8
DT SUFFIX
CASE 948R
8
HP61
ALYW
1
8
KP61
ALYW
1
H = MC10
K = MC100
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
*For additional information, see Application Note
AND8002/D
ORDERING INFORMATION
Device
Package
Shipping
MC10EP16TD
SOâ8
98 Units/Rail
MC10EP16TDR2 SOâ8 2500 Tape & Reel
MC100EP16TD
SOâ8
98 Units/Rail
MC100EP16TDR2 SOâ8 2500 Tape & Reel
MC10EP16TDT TSSOPâ8 100 Units/Rail
MC10EP16TDTR2 TSSOPâ8 2500 Tape & Reel
MC100EP16TDT TSSOPâ8 100 Units/Rail
MC100EP16TDTR2 TSSOPâ8 2500 Tape & Reel
© Semiconductor Components Industries, LLC, 2002
1
September, 2002 â Rev. 3
Publication Order Number:
MC10EP16T/D
|
▷ |